Addition cure injection moulding silicone rubber(for pacifier)

Addition cure injection moulding silicone rubber(for pacifier) application:

Addition cure injection moulding silicone rubber(for pacifier) is a kind elastic silicon rubber mold which features with resistance to deformation.It is suitable for baby nipple,pacifier.

Addition cure injection moulding silicone rubber(for pacifier) features:

Addition cure injection moulding silicone rubber(for pacifier) is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.

Addition cure injection moulding silicone rubber(for pacifier) operations:

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

Addition cure injection moulding silicone rubber(for pacifier) frequent asked question:

Why does the silicone rubber mold have few molding times?

Addition cure injection moulding silicone rubber(for pacifier) has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.

Addition cure injection moulding silicone rubber(for pacifier) instruction:

Typical data can not be directly used for actual production guidance. Please contact us for details.

Addition cure injection moulding silicone rubber(for pacifier)  package :

The general packages of  Addition cure injection moulding silicone rubber(for pacifier) is in 20kg and 200kg per barrel.

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89948294

Mob:86-15989267535

E-mail: hysh(at)szrl(dot)net  

Skype:kity-467707861

You can also send me E-mail by scanning  2-Dimensional Bar Code below:

Certification of Addition cure injection moulding silicone rubber(for pacifier):

Package of Addition cure injection moulding silicone rubber(for pacifier):

Our factory: