200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-924# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:13:50 GMT
Color Any color is available
Certificate ISO9001,SGS
usage for gift ,toys ,artwork craft
MOQ 200kg
Payment T/T L/C Western union
Package 25kg/drum 200kg/drum
Port Shenzhen
Hs code 39100000
Min Order200 kilogram
Liquid injection silicone rubber for casting jewelry Application:
Because of the outstanding properties,HY-924 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.
Liquid injection silicone rubber for casting jewelry Specification:
Vulcanisates consisting of HY-924 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Liquid injection silicone rubber for casting jewelry Typical Physical Properties
Product | HY-924 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
Liquid injection silicone rubber for casting jewelry is a two-component liquid silicone rubber for injection molding processes. HY-924 shows a higher productivity, less yellowing and low volatile contents. HY-924would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Liquid injection silicone rubber for casting jewelry Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times
Any question abt silicone rubber, pls free to ask Ms. Christy
Tel: 86-755-89948006
Mobile:86- 18938867547
Fax: 86-755-89948030
Email: hyxj(at)szrl(dot)net
Skype:christyxu911
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.