200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-921 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:14:16 GMT
color Translucent silicone rubber
Viscosity (Pa.S) 400
Density (g/cm3) 1.07
Hardness (A°) 55-60
Elongation at break (%) 400
Tear strength (KN/mm) 25
Curing condition 7 minutes under temperature of 150℃
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF/DDU
Min Order200 kilogram
Typical Properties of silicone rubber for injection moulding
silicone rubber for injection moulding, which is an elastomer cured under high temperature, has the following excellent properties:
High tear strength(≥25KN/m)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Description of silicone rubber for injection moulding
silicone rubber for injection moulding is suitable for injecting moulding technique with high strength, and tear strength. It is mainly used for making silicone products,such as baby nipples, medical tube,key board etc.
Standard Datasheet of silicone rubber for injection moulding:
Item | HY-921 | |
Appearance | Translucent | |
Viscosity (Pa.S) | 400 | |
Density (g/cm3) | 1.07 | |
Hardness (A°) | 55-60 | |
Elongation at break (%) | 400 | |
Tear strength (KN/m) | 25 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
Instruction:Typical data can not be directly used for actual production guidance. Please contact us for details.
Package of silicone rubber for injection moulding:
The general packages of HY-92XA/B series is in 20kg and 200kg per barrel.
If you have any questions with silicone rubber for injection moulding, feel free to contact Ms Aimee
MSN: aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email:hysz(at)szrl(dot)net
Tel: 0086-755-89948019
Mob: 086-18938867541
Trademanager:cn200039753
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.