Tin and Platinum Cure Silicone for insoles

 Tin and Platinum Cure Silicone applications

Tin and Platinum Cure Silicone   is primarily intended for animal craft mold ,concrete product mold , plastic toy ,

Tin and Platinum Cure Silicone  is used for artwork mold ,gypsum crafts ,unsaturated resin crafts, lighting and candles

Tin and Platinum Cure Silicone is applicable for stationery gifts crafts industry, a large statue Buddha, relievo furniture,  Tin and Platinum Cure Silicone is sutablle for statues Buddha, , building decoration materials, large-scale cement ,

Tin and Platinum Cure Silicone is great to artificial fossils Factory, Europe component factory,  simulation landscapes,

Tin and Platinum Cure Silicone  is used for sculpture, sandstone crafts and so on

Tin and Platinum Cure Silicone for insoles features

  Tin and Platinum Cure Silicone for insoles  is flowing liquid with general hardness of 22-50 A° after curing with features:

(1) Tin and Platinum Cure Silicone Rubber with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 200KG

  Tin and Platinum Cure Silicone for insoles operations

If the customer wants to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision  patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If moulds requiring fast drying and demould, more curing agent is needed; contrarily, if moulds requiring slower drying and demould, less curing agent is needed.Our curing agent is free charged.

 
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

 FAQ of Tin and Platinum Cure Silicone for insoles

Why does the Tin and Platinum Cure Silicone Rubber  just has few duplication times?
The silicon rubber mould just has few duplication times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mould for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mould for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mould will have deformation. Thus, we should take the proper silicone rubber to make the mould for suitable products. 
  

Any question abt  Tin and Platinum Cure Silicone for insoles pls free to ask Ms. Bella

Tel: 086-0755-89948006

Cell phone: 086- 18938867572

Fax: 086-0755-89948030

Email:hysi(at)szrl(dot)net

Skype:bellajiaqi