8 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order8 kilogram
brand nameHong Ye silicone rubber
modelHY-625 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:24:00 GMT
Color White
Min Order8 kilogram
RTV molding silicon for gysum decoration in hot selling
RTV molding silicon using area
1. RTV molding silicon can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. RTV molding silicon is applicable for large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold,
3. RTV molding silicon is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV molding silicon for gypsum decoration feature:
1.Two-part silicon rubber:flowable liquid silicon and curing agent.
2.Cures at room temperature within 6-8 hours.
3.An exceptional fluidity and good operability, easy to demold.
4.Good tensile and tear strength, low shrinkage.
5.High duplication times
RTV molding silicon for gypsum decoration 625 TDS
Model | 625# |
Appearance | white |
Mixing proportion of curing agent(%) | 2-3% |
Operating time ( mins ) | 30-60 |
Curing time( hours ) | 6-8 |
Hardness (A°) | 25 |
Density ( g/cm 3) | 1.08 |
Viscosity (CS) | 19000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥22 |
Elongation-break(%) | ≥400 |
Retractility(%) | ≤0.3 |
why chose RTV molding silicon for gypsum decoration
RTV molding silicon is an effective and inexpensive way to create multiple copies of a master prototype part when you need a spec-like material for multiple sets, in a short timeframe, for less than a traditional tool would cost.
rtv molding Siliconeare capable of reproducing remarkable detail, and because of the flexibility of silicone, draft angles, inserts, and undercuts are not as critical as in other molding processes.
During operate the three impotant thing to pay attention :
1. weigh the liquid silicone rubber and curing agent exatly .
2. Stir the liquid silicone rubber and curing agent evenly .
3.we shouldchoose the right hardness to making diffirent size of product mold
Certificate of RTV molding silicone
Rohs
ISO2009
FDA
SGS
Any other information needed , pls feel free to contact Judy
MOBILE:086-18938867591
Skype: judy.zhao723
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.