200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620# high heel silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:32:42 GMT
Color Any color is available
Certificate ISO9001,SGS,REACH
application for sculpture mold making ,concrete mold making
MOQ 200kg
Payment T/T L/C Western union
Features Liquid
FOB Price US$12-18
Hs code 39100000
Port shenzhen
Min Order200 kilogram
Silicone aplication
silicone is good for high heel , silicone insoles, pads, keen pads etc.
high heel silicon advantage
1. 100% medical grade silicone. Non-toxic.
2. Silicone distributes load more evenly. Shock absorption and pain relief.
3. Silicone grantees superior comfort and long lasting effectiveness.
4. With minimal toe depth in the front to make your feet comfortable.
5. Multi-purpose. Fit all kinds of shoes, including ladies shoes, running shoes and foorball boots.
6. Easy use. Can be changed from a shoe to another one easily.
7. Endurabel and won't get deformed.
8. Easy cleaning. Does not absorb odors.
9. Both OEM and ODM service.
high heel silicon data sheet
Model | HY-E20# | HY-E10# |
Appearance | Translucent/ Skin | Translucent/Skin |
Mixing Ratio | 1:1 | 1:1 |
Operating time (Mins 25°C) | 20-30 | 10-15 |
Curing time (Mins 25°C) | 60-90 | 60-90 |
Curing time (Mins 60°C) | 10-15 | 20 - 30 |
Hardness (A°) | 20±2 | 10±2 |
Density ( g/cm 3 ) | 1.08 | 1.08 |
Viscosity (CS) (Part A) | 6000-8000 | 30000 ± 5000 |
Viscosity (CS) (Part B) | 6000-8000 | 5000 ± 500 |
Viscosity (CS) (After mixed) | 6000 ± 1000 | 10000 ± 1000 |
Tensile-strength( kgf /cm2 ) | 75 ± 20 | 35 ± 20 |
Tear-strength (kgf /cm2 ) | 24 ± 2 | 10 ± 2 |
Elongation-break(%) | 420 ± 50 | 450 ± 50 |
Retractility(%) | ≤0.1 | ≤0.1 |
Instructions of silicone high heel
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame. After about 2~4 hours, when the silicone cured,
get out the original model, and there you get a finished addition cured silicone mold .
If any questions abt silicone high heel pls contact Bella
Mob: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Email: hysi (at) szrl (dot) net
Skype: bellajiaqi
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.