200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E625,Additional molding silicone E series
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:35:05 GMT
Color Translucent
Certificat MSDS, SGS, RoHS, Reach , ISO9001:2000
Application For molds making
Packing Vacuum Pumping
Shelf Life 12 months
Shape Liquid
business type manufacture
Min Order200 kilogram
2 part high elasticity Silicone for making Insoles
HY-E625 Liquid Silicone for Insoles is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the E625# A and E625#B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles.
Application:
HY-E625 silicone rubber is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Specification:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Typical Physical Properties
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)
Using instructions:
1 Applicable to the injection molding process
2 Mixing component A with B evenly according its mix ratio, it is ready for use after degassing, it cures by heating up the temperature when pouring into the mold.
3 The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
Feel free to contact Kelly if any we can help,
E-mail: hyjm(at)szrl(dot)net
MSN:kelly6in(at)hotmail(dot)com
Skype:kelly619106
Tel: 086-755-89212382
Mob:86-18690907219
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.