silicone heighten insole

FEATURE of  silicone heighten  insole :

    1. silicone shoe insoles making  is Two-part silicon rubber 

    2. silicone shoe insoles making can both cured at room temperature within 2-4 hours or cured under heated 

    3.soft and comfortable silicone insoles 

    4.Transparent and translucent silicone are available 

      Parameter of silicone heighten insole

 Operation of   silicone heighten  insole

1.Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Any further imformation requried,pls feel free toMiss Shirley ,dail the number of 0086-755-89948019 or mobile 0086-15220170905

Welcome to visit www(dot)szrl(dot)net anytime to find your desired products.

Thans for your attention

Ms Shirley