liquid silicone rubber for heel cup insoles (foot care)
- US $12.35
200 - 40,000 kilogram
- US $9.98
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620,HY-E625,Q-620,Q625
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 21:41:56 GMT
Paramtents
Color high translucent
high translucent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Appearance Fluid
Appliacation for foot care silicone insole
Packging & Delivery
Min Order200 kilogram
Briefing
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
Detailed
Liquid silicone rubber for heel cup insoles (foot care)
1. liquid silicone rubber for heel cup insoles (foot care) Introduction:
HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles (foot care)
2. liquid silicone rubber for heel cup insoles (foot care) Application:
HY- E620# addition molding silicone could be mainly used for making silicone insoles, concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles (foot care)
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles (foot care)
3.Technique Data liquid silicone rubber for heel cup insoles (foot care) :
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
4.OPERRATING INSTRUCTION of liquid silicone rubber for heel cup insoles (foot care):
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Any questions, please feel free to contact Jesmine:
Mobile: 0086-18938867570
Fax: 0086-755-89948030
Tel: 0086-755-89212369
E-mail: hysk[at]szrl.net
MSN: JesmineWang[at]hotmail.com
Website: ..........net
Skype: Jesminehy
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles foot care
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles
liquid silicone rubber for heel cup insoles (foot care) liquid silicone rubber for heel cup insoles
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents