100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY- E635# HY- E642#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:44:45 GMT
Color translucent
Purity 100%
Appearance Liquid
Application silicone rubber mold
Catalyst 4% free of charged
Molding method Pouring , brushing
Package vacuumed packing
Shelf life 12 months
MOQ 100KGS
Sample Free
Min Order100 kilogram
HY- E635# Addition Molding Silicone
1.Description of HY- E635# Addition Molding Silicone
HY-E635# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds and prototyping application.
Technique Data of HY-E635# Addition molding silicone
Model | HY-E635# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 28°C) | 30 |
Curing time (Hours 28°C) | 3-4 |
Hardness (A°) | 35±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 23000- 2700cps |
Viscosity (CS) (Part B) | 23000- 2700cps |
Viscosity (CS) (After mixed) | 6500 ± 200 |
Tensile-strength( kgf /cm2 ) | 100± 2 |
Tear-strength (kgf /cm2 ) | 14 ± 2 |
Elongation-break(%) | 380-420 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E635# Addition molding silicone:
1.Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Attention: Do not use the same container to hold addition cured silicone rubber and condensation one, and it is also forbidded to use the same rod to stir the condensation and addition cured silicone rubber)
More details of Addition Molding Silicone, pls feel free to contact Ms Taylor:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.