RTV molding silicone rubber-similar with Dow Corning 3481 manufacturer
- US $8.98
200 - 40,000 kilogram
- US $7.05
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625 HY630
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 21:54:05 GMT
Paramtents
Material 100% silicone
Color varies
HARDNESS 10-40A
Classification Chemical Auxiliary Agent
Appearance fluid
Certification SGS,MSDS,RoHS
Sample free
modes of transport by sea
Hs code 39100000
Packging & Delivery
Min Order200 kilogram
Briefing
1)concrete & plaster
2)candle & soap
3)stone & resin
Detailed
RTV molding silicone rubber application:
1. Decorative items: cornices,columns,ornaments ,statues
2. Casting: funiture and decoration
2. Construction: prefabrication of decrative feature,pavement,paving stone,urbanfurniture,concrete products
4. Soap,candles crafts,toys,sculpture
RTV molding silicone rubber feature:
1. Two-part silicon rubber:flowable liquid silicon and curing agent.
2. An exceptional fluidity and good operability.
3. Temperature and deformation resistance as well as low shrinkage.
4. High duplication times.
RTV molding silicone rubber datasheets:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength | Tear-strength | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
HY625# | white | 100 : 5 | 45-60 | 4-6 | 23-26 | 45kgf/cm2 | ≥ 29kgf/cm | 19500 | ≤0.3% | 450% |
HY630# | white | 100 :5 | 30-40 | 3-5 | 29-31 | 49kgf/cm2 | ≥ 33kgf/cm | 27000 | ≤0.3% | 490% |
Dowcorning3481 | white | 100 : 5 | 30-45 | 5-6 | 22-25 | 4.6Mpa | 23kN/m | 25000 | ≤0.5% | 520% |
Bluestar (3325 /585) | white | 100 : 5 | 20-60 | 6-24 | 25-28 | 4.2Mpa | 26kN/m | 35000 | ≤0.7% | 440% |
Wacker®M4503 | white | 100 : 5 | 30-90 | 10-20 | 25 | 5.0(N/mm² | > 20N/mm | 40000 | ≤0.5% | 350% |
SmoothonMoldMax®25 | white | 100 : 5 | 45 | 24 | 25 | 577psi | 130pli | 25000 | 002 in./in. | 375% |
FAQ of RTV molding silicone rubber:
Why should the rtv-2 silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicone rubber.
b. Using the silicone rubber with a high hardness to make molds for small sized productswith delicate and intricate designs .
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
RTV molding silicone rubber package:
RTV molding silicone rubber certification:
Our factory:
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents