1,000 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order1000 kilogram
brand nameHong Ye silicone rubber
modelTB0315 RTV silicone Screen Printing
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 22:08:34 GMT
Type silicone ink
Printing Type Screen Printing
Color Transparent
Certificate MSDS , SGS, RoHS , Reach , ISO
Mix Ration 1: 1
Operation By Machine
Cure time Few seconds at temperature of 150C
Package 25kgs or 200kgs
Shelf Life 12 months
Viscosity 60000-80000CPS
Payment within 3 days after payment confirmed in our bank
Delivery within 3 days after payment confirmed in our bank
Min Order1000 kilogram
Silicon Ink for Screen Printing of Textile Coating
Silicon Ink for Screen Printing of Textile Coating is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is
complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.
Application of Silicon Ink for Screen Printing of Fibric Coating:
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
Specification of Silicon Ink for Screen Printing of Textile Coating:
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Datasheet of Silicon Ink for screen Printing of Textile coating:
Model | TB0315 |
Appearance | Transparent |
Hardness(shore A) | 15±2 |
Mix ratio(A:B) | 1:1 |
Viscosity(mPa.s) | 60000~100000 |
Tensile strength(Mpa) | 4.6 |
Tear-strength(KN/m) | 19±2 |
Elongation(%) | 360 |
Pot life/working time(25°C) | 12-24 hours |
curing time(100-120°C) | 10~20(mins) |
Operation introduction of Silicon Ink for Screen Printing of Fibric Coating:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~190 degree, the curing time will be 5~10 minutes.
SHELF LIFE of Silicon Ink for Screen Printing of Fibric Coating:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE of Silicon Ink for Screen Printing of Fibric Coating:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
For more information about the Silicon Ink for screen Printing for Textile Coating , please don't heistate to contact with Miss Caroline at any time :
TEL: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.