200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelTB3140 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 22:28:10 GMT
color translucent silicone rubber
Hardness (A°) 40
Mixing Ratio of silicone and catalyst 1:1
Operating time (mins 25 0C ) 72hous
Curing time(180C ) 5mins
Application most for resin, gypsum and cement product to make moulds
sample available
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF
Min Order200 kilogram
Application of silicone printing on artificial leather fabric surface:
silicone printing on artificial leather fabric surface can be used for printing of sealing patterns for on deverse substrates like steel or sulphur containing or sulphur free cylinder head gaskets by silk screen printing.
Description of silicone printing on artificial leather fabric surface:
silicone printing on artificial leather fabric surface is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of almospheric moisture.
Specification of silicone printing on artificial leather fabric surface:
- Ready to use
- Resistant to high temperatures
- Resistant to mineral oil and coolant
- Solvent free
- Long open time, suitable for screen printing
- Can be colored with 3-5% Pigment Paste
Processing of trademark screen printing silicone rubber:
Some filler may settle during transport and storage, to ensure a uniform mix, the components should be thoroughly stirred prior to use.
Silk screen printing silicone elastosil is a moisture curing silicone sealant. For this reason the curing rate strongly deends on both temperature and atmospheric humidity in the surrounding.
Silk screen printing silicone elastosil can be applied with standard silk screen printing equipment.
Silk screen printing silicone elastosil cures under the invluence of moisture from the air, colors may be obtained by addition of 3-5% pigment paste if desired. After addition the material has to be mixed carefully.
Storage of silicone printing on artificial leather fabric surface:
The best use before end date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked fro quality assurance reasons.
Datasheet of silicone printing on artificial leather fabric surface:
Model | TB 3140 |
Color | Translucent |
Density at 23°C | 1.2 g/cm3 |
Viscosity, dynamic at 23°C | 10 s-1 at 20°C |
Curing time, thickness 0.1 mm in a circulating air oven at 150°C | 30 min |
Curing time, thickness 0.1 mm in a circulating air oven at 175°C | 15 min |
Curing time, thickness 0.1 mm in a circulating air oven at 200°C | 10 min |
Curing time, thickness 0.1 mm in a circulating air oven at 175°C with steam | 5 min |
Hardness shore A | 40 |
Elongation at break | 500% |
Tensile strength | 205 N/mm2 |
Tear resistance | 5.5 N/mm |
If you have any questions with silicone printing on artificial leather fabric surface, pls feel free to contact Ms Aimee
MSN: aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email:hysz(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867541
Trademanager:cn200039753
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.