liquid silicon for Electronic antivibration

1.Applications liquid silicon for Electronic antivibration:

Liquid silicon for  Electronic antivibration is applicable to large size products duplications and  Electronic equipment antivibration 

2.Features of liquid silicon for Electronic antivibration

Liquid silicon for  Electronic antivibration has good elasticity, non-deformation , high temperature resistance, low shrinkage. And it is suitable for manual mold design and small duplication mold production.

3.Operation of liquid silicon for Electronic antivibration

(1)  Correct mixing ratio

Component A is silicone rubber, and component B is curing agent or vulcanizing agent, usually the mixing ratio  will be 2-3%.

(2) you should deal carefully with the Original mold or the products you want to be molded.

(3)Vacuum-Pumping Process

To mix the silicone and catalyst with a standard mixing ratio and then do the process of Vacuum-Pumping. Bubbles will come out during the mixing of the silicone and hardener,  

4.FAQ of liquid silicon for Electronic antivibration:

How to deal with the bubbles during the mixing process of liquid silicon for  Electronic antivibration?

It depends on your practical situation. Firstly you can deal the mixture with a vacuumizer if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.

5.For getting further information about liquid silicon for  Electronic antivibration, PLS contact with Miss Caroline

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net