RTV pad printing silicone rubber

Sell RTV pad printing silicone rubber  

The pad printing silicone rubber applications

The silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface. 

Pad printing silicone rubber features:

Pad printing silicone rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable,we can provide all kinds of colors are available and our catalyst is free charged.

^{_{Pad printing silicone rubber operation instructions:}}

^{_{Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100 : 2-3, eg. we take 100grams of liquid silicone rubber,then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.}}

Pad printing silicone rubber Standard Datasheet:

Model: 912#

Appearance:  red, green

Viscosity ( CPS):   20000~25000

Hardness (Shore A):  28~30

Tensilte-strength (kgf/cm):  ≥35

Tear-strength (kgf/c):   ≥24

Shrinkage (%): ≤0.3

Elongation(%):  ≥400

Mixing ratio(%):   2

Operation time(H): 0.5

Curing time(H): 2~4

Frequently asked questions of pad printing silicon rubber:

Why does the silicone pad can't pick up the ink well?

Any silicone pad can pick up the ink. Generally, if a big pattern with big words to be printed, a silicone pad with higher hardness is required. If the silicon pad can't pick up ink well may because the patterns or letters are too complicated but with harder silicon pad which didn't pick up the ink from the cliche plate. 

Any questions of  silicone rubber, please feel free to contact Berry:

Mobile:86-18938867580

TEL: 86-0755-89212365

FAX: 86-0755-89948030

Welcome to visit www (dot)szrl (dot)net anytime.