100 - 40,000 kilogram
40,001 - 999,999 kilogram
group namePad printing silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY 912#,HY 918#,HY928#,HY966#,HY900#,HY911#,HY2018
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 11:31:40 GMT
Min Order100 kilogram
Sell pad printing silicone (SGS.MSDS.RoHS.ISO9001)
Pad printing silicone rubber applications
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.
Pad printing silicone rubber features description
Pad printing silicone rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors and our catalyst is free charged.
1 resistance to deformation, high-temperature
2 high printing times
3 good aging resistance
4 exceptional elasticity
5 great printing effect
Pad printing datasheets
Model: 918#
Appearance: yellow, red, green, white
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength (kgf/cm): ≥35
Elongation break(%):≥500
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 928#
Appearance: translucent
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥20
Elongation break(%):≥410
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 966#
Appearance: white
Viscosity(cs): 15000-18000
Hardness(A): 24
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥20
Elongation break(%):≥410
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 900#
Appearance: yellow
Viscosity (cs): 18000
Hardness (A): 25
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥20
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 911#
Appearance: yellow, red, green, white
Viscosity(cs): 15000-18000
Hardness(A): 25
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥19
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 912#
Appearance: red, green
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength (kgf/cm):≥33
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 2018#
Appearance: white
Viscosity (cs): 12000-15000
Hardness (A): 23-26
Tensile strength (kgf /cm):≥25
Elongation break(%):≥350
Retractility (%):≤0.3
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Pad printing silicone rubber operation instructions
Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100:2-3, eg. we take 100grams of liquid silicone rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
Any further information required about Pad printing silicone rubber,pls feel free to contact Miss Berry,and call the number of0086-18938867580.
Welcome to visit www(dot)szrl(dot)netanytime .
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.