pad printing silicone

  pad printing silicone

Key words:  pad printing silicone rubber, rtv silicone, pad printing silicone, liquid silicone for pad printing, silicone for pad printing, liquid silicone for printing.

Characteristics of  pad printing silicone

  pad printing silicone is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.

Application of  pad printing silicone:
 pad printing silicone isapplicable to plastics toys, electroplating products, PVC toys, plastics   toys, craftworks, trademarks and irregular pattern printing .it has the advantage of abrasion resistance, high   temperature resistance, good printing effect, etc.

Features of pad printing silicone:

a) Resistance to deformation, high-temperature

b) High printing times

c) Good aging resistance

d) Exceptional elasticity

e) Great printing effect

Usage ofpad printing silicone:

1) Uniformly stir the silicone rubber for pad printing for 5-10 minutes in the package barrel before use.

 2) Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.

3) The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern   is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high   hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing   silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times   is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing

FQA of  pad printing silicone:
:
·Why is the pad printing siliconenon-durable are?

  1.Because of the imcompleted process of filtering , there are some impurities left in the pad printing silicon rubber .

  2.As we know, silicon oil is a additive which will destroy the molecular chain of the silicon rubber for pad printing  then it will cause the easy ageing .

  3.some customers don’t change the printing pad according to the size of the pattern , for large pattern, large silicon pad should be used ,otherwise ,use small one .

Any question abt   pad printing siliconeplease feel free to ask Cindy:

Tel: 86-755-89948158
Mob: 86-13266634823

Email:hysg(at)szrl(dot)net
Skype:cindyyeah5

Msn: hycdy(at)live(dot)cn