100 - 40,000 milligram
40,001 - 999,999 milligram
group namePad printing silicone rubber
Min Order100 milligram
brand nameHong Ye silicone rubber
modelHY912
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 11:46:39 GMT
HS code 39100000
color red, green, white
feature liquid
Certificant SGS, ROHS, REACH
Model No HY912
Brand Hong Ye silicone rubber
MOQ 100kgs
Min Order100 milligram
Description and Application of RTV-2 silicone rubber:
RTV-2 silicone rubber is applicable to produce printing pads,mainly used for printing the irregular patterns on plastic toys,electroplating products,electronic toys,tradermarks etc.
This product is featured as good printing effects,no particle,without any impurity,resistance the friction,and good resilience.Different color(such as red,green,yellow etc) are available according to the requirements of customers.
Advantages of our RTV-2 silicone rubber
High printing times and good printing effects
Good tensile and tear strength, low shrinkage(<0.3% or 0.1%)
No Particle
Without any impurity
Resist the friction and good resilience
Our catalyst is for free charge as mixing ratio of 100:3(condensation cure type only).
Long shelf life(12 months at least) which is import for oversea market.
Models of RTV-2 silicone rubber
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (Mpa) | Tear-strength (KN/m) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
901 | Any color | 100 : 2-3 | 30 | 2-4 | 25±2 | ≥ 45 | ≥ 25 | 30000-34000 | ≤0.3% | ≥ 380 |
902 | Any color | 100 : 2-3 | 30 | 2-4 | 30±2 | ≥ 40 | ≥ 25 | 30000-34000 | ≤0.3% | ≥ 390 |
912 | Any color | 100 : 2-3 | 30 | 2-4 | 30±2 | ≥ 50 | ≥ 30 | 24000-30000 | ≤0.3% | ≥400 |
916 | translucent | 100 : 2-3 | 30 | 2-4 | 10-15 | ≥ 25 | ≥ 25 | 24000-30000 | ≤0.3% | ≥ 410 |
FAQ:Why the RTV-2 pad printing silicone rubber can not transfer the printing pattern well?
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
Any questions of RTV-2 silicone rubber, please feel free to contact Cassi.
Shenzhen Hong Ye Jie Technology Co.,LTD
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-15220073603
Website: www(dot)szrl(dot)net
E-MAIL: hyjg(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.