artwork gifts of pad printing silicon

Features of artwork gifts of pad printing silicon

artwork gifts of pad printing silicon with high print times and abrasion resistance.and has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free. 

Usage of artwork gifts of pad printing silicon:

artwork gifts of pad printing silicon is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic toys, trademarks, artwork gifts, and stationery,  cements products etc.

Descripting of artwork gifts of pad printing silicon:

901# low quality with the hardness of 25 shore A to 28 shore A

902# better quality with the hardness of 25 shore A to 28 shore A

912# best  quality with the hardness of 25 shore A to 28 shore A

916# half transparent liquid  with the hardness of 25 shore A to 28 shore A

918# soft liquid with the hardness of 18 shore A to 20 shore A

Operation Instruction for Pad Printing silicon rubber:

Firstly, clean the mold with detergent, and dry it by a piece of cloth or an air gun and then coat the mold with a layer of release agent.

Second:Generally, the ratio of pad printing silicon rubber to the silicon oil depends on the size of pattern which customer needs to print. The larger the pattern is, the softer the printing pad should be, and more silicon oil needs to add.

 Relation between the amount of the curing agent added and the chemical reaction of the silicon is as follows: mix 100g silicon and 50g silicon oil sufficiently and evenly, then add the curing agent which is 2%-3% of the total weight of the silicon and the silicon oil

Third:adjust the ratio between the silicon rubber and silicon oil according the customer’s requirement.

FAQ of artwork gifts of pad printing silicon:

Why the artwork gifts of pad printing silicon pad can not transfer the printing pattern well?

 It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.

For getting further information about  artwork gifts of pad printing silicon, PLS contact with Miss Judy

Mobile:86-18938867591 

E-mail: hyja(at)szrl(dot)net 

Skype: judy.zhao723