200 - 40,000 kilometer
40,001 - 999,999 kilometer
group namePad printing silicone rubber
Min Order200 kilometer
brand nameHong Ye silicone rubber
modelHY-933 silicone rubber
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 11:55:49 GMT
color for A white
color for B light red
sample available
feature 1 good printing effect
feature 2 without impurity
feature 3 high printing times
feature 4 leading silicone manufacture
feature 5 technical service available
feature 6 endurable
feature 7 catalyst is free
Min Order200 kilometer
Typical Applications of Platinum Cured Pad Printing Silicone Rubber
Pad printing silicone rubber is applicable to produce printing pads, mainly used for printing the irregular patterns on plastic toys, electroplating products, electronic toys, trademarks etc.
Characteristics of Platinum Cured Pad Printing Silicone Rubber
- High printing times and good printing effects
- Good tensile and tear strength, low shrinkage
- No Particle(Without any impurity)
- Resist the friction and good resilience
- Different color(such as red, green, yellow, etc) are available
- Great fluidity and easy to operate
Technical Parameters of Platinum Cured Pad Printing Silicone Rubber
Model Code | Available Color | Curing Type | Hardness (Shore A) | Mixing Ratio (A:B) | Viscosity (mPa.s) | Tensile Strength (MPa) | Tear-Strength (kNm) | Elongation (%) | Pot Life (mins) | Curing Time (Hrs) | Shrinkage Rate (%) |
HY 933 | A: White B: Red | Platinum Cure | 33+/-2 | 9:1 | 18000+/-2000 | 3 | 8 | ~350 | 15~30 | 2~4 | ~0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
Packaging of Platinum Cured Pad Printing Silicone Rubber
Pad Printing Silicone HY 933 Base is available in 20kg containers – 18kgs A + 2kgs B.
Notes of Platinum Cured Pad Printing Silicone Rubber
1.The following material may hinder the curing of HY 933, so please use after the test. When necessary, please clean the application areas.
l Organotin compound or Condensation silicone with organotin
l Sulphur sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux
2. HY 933 should be sealed storage.The mixture should be used up disposably to avoid
Any other information needed , pls feel free to contact Shirley
Tel:0086-755-89948019
mobile: 0086-15220170905/18938867596
Or mail:hyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.