200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namePad printing silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-933
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 11:59:37 GMT
component A white
component B red
ratio 9:1
Certification SGS,MSDS,RoHS
Material Material
Classification Chemical Auxiliary Agent
Appearance Fluid
Application making silicone pad
color any
Min Order200 kilogram
Characteristics and Application of Pad Printing Silicone Rubber for making transfer pad :
1. Printing silicone rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.
2. Condensation type printing silicone rubber is used for surface printing of plastic and hardware products. It has good resistance to wearing, no distortion, no leakage and good ink transfer property.
Product Data of Pad Printing Silicone Rubber for making transfer pad :
Item No | Appearance | Hardness (A°) | Viscosity (CS) | Tensile-strength( Mpa ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing Ratio of silicone and catalyst | Curing type | Working time(mins 25 0C) | Curing time(hours 25 0C) | shirinkage tare(%) |
901# | Yellow,Green,Red,White | 30±2 | 32000±2000 | 3.8 | 22±2 | 380 | 2%-3% | Condensation cure | 30-40 | 3-4 | 0.3 |
902# | Yellow,Green,Red,White | 30±2 | 35000±2000 | 4 | 24±2 | 430 | 2%-3% | Condensation cure | 30-40 | 3-4 | 0.3 |
912# | Yellow,Green,Red,White | 30±2 | 32000±2000 | 4 | 25±2 | 340 | 2%-3% | Condensation cure | 30-40 | 3-4 | 0.3 |
916# | Yellow,Green,Red,White | 14±2 | 36000±2000 | 3.5 | 25±2 | 570 | 2%-3% | Condensation cure | 30-40 | 3-4 | 0.3 |
918# | Yellow,Green,Red,White | 30±2 | 33000±2000 | 4.2 | 27±2 | 320 | 2%-3% | Condensation cure | 30-40 | 3-4 | 0.3 |
933# | Red,White | 32±2 | 18000±2000 | 3 | 8 | 350 | 09:01 | Addition cure | 10-20 | 2-4 | 0.1 |
How to Use Pad Printing Silicone Rubber for making transfer pad :
1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.
2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing.
Storage, Transportation and Notes:
1.The products should be deposited in a clean, ventilating and shade place.
2. The products are non-dangerous goods.
3. Avoid skin and eyes contacting with the curing agent in processing.
4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.