High quality pad printing silicon rubber

FOB Price

US $6.60
50 - 40,000 kilogram
US $5.90
40,001 - 999,999 kilogram

group namePad printing silicone rubber
Min Order50 kilogram
brand nameHong Ye silicone rubber
modelHY 912.902.928silicone rubber
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 11:59:53 GMT

contact supplier

Paramtents

certificates RoHS. MSDS.SGS ISO9001:2000
Delivery Time within 3 days after payment confirmed in our bank.
mix 1:1 or 10:1
promotion over 500KG 2% discount
colur red,green,yellow
good elasticity,good printing no impurites,good elasticity,good printing
material liquid silicone with two part
usage fine quality pad printing silicon rubber
environmental protection yes
samples available

Packging & Delivery

Min Order50 kilogram

Briefing

1 High quality pad printing silicon rubber
2 Applicable to printing patterns
3 Fine quality,and without impurities

Detailed

high quality pad printing silicon rubber

1. Datasheet of High quality pad printing silicon rubber :

Special silicon products for pad printing
Model	901#	902#	912#	916#	918#
Appearance	Red white Yellow green	Red white Yellow green	Red white Yellow green	Red white Yellow green	Red white Yellow green
Mixing proportion Of curing agent	2-3%	2-3%	2-3%	2-3%	2-3%
Operating time (hours)	0.5	0.5	0.5	0.5	0.5
Curing time (hours)	3-4	3-4	3-4	3-4	3-4
Hardness (A°)	20-25	26-30	26-30	20-22	26-30
Viscosity (cs)	29000-34000	29000-34000	29000-35000	29000-35000	28000-34000
Tensile-strength ( kgf /cm)	≥30	≥32	≥35	≥35	≥36
Tear-strength ( kgf /cm)	≥18	≥22	≥24	≥24	≥26
Elongation-break ( % )	≥360	≥380	≥410	≥420	≥420
Retractility (%)	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3
Usage	Pad printing only	Pad printing only	Pad printing only	Pad printing only	Pad printing only
Package	20kg/drum and 200kg/drum

2.Features of High quality pad printing silicon rubber :

Pad printing silicon rubber has the advantage of good printing effects, fine quality,favorible resilience, high print times and without any impurity.

Frequently asked questions about pad printing silicon rubber:

Why the printed pattern is incomplete or not clear

If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.

If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.

Why the silicon pad did not absorb the ink

Any silicon pad or liquid silicon rubber could absorb ink well. If large patterns or big letters need to print, the printing pad will for sure absorb ink well. For small letters, please do not use hard silicon pad, as it could not absorb the printing ink thoroughly from the steel plate.

Why the silicon pad can not transfer the printing pattern well

It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.

For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531

skype: wensona

E-mail:hyb(at)szrl(dot)net

website:www(dot)szrl(dot)net