100 - 40,000 kilogram
40,001 - 999,999 kilogram
group namePad printing silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-918
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:04:05 GMT
certificate ROHS,SGS,ISO9001:2000
HS code 39100000
color red/yellow
sample available
mix ratio 1:1
brand hongye silicone
place China
model 933# 916#
sticky available
packages 20kg/drum
Min Order100 kilogram
Application of Pad Printing Silicone for making transfer pad manufacture :
Pad Printing Silicone for making transfer pad manufacture is used for surface printing of plastic and hardware products. It has good resistance to wearing, no distortion, no leakage and good ink transfer property.
Charateristic of Pad Printing Silicone for making transfer pad manufacture :
Pad Printing Silicone for making transfer pad manufacture is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.
Product Data of Pad Printing Silicone for making transfer pad manufacture :
Model | Appearance | Viscosity (cps) | Hardness (Ao) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing Ratio(%) | Pot life (H) | Demould time(H) |
916 | red / yellow | ≤35000 | 15±2 | ≥3.5 | ≥24 | ≥420 | 2~3 | 0.5 | 2~4 |
How to Use Pad Printing Silicone Rubber for making transfer pad :
1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.
2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing.
Storage, Transportation and Notes:
1.The products should be deposited in a clean, ventilating and shade place.
2. The products are non-dangerous goods.
3. Avoid skin and eyes contacting with the curing agent in processing.
4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.
5.The datesheet of Pad Printing Silicone for making transfer pad manufacture
Model
| 901# | 902# | 912# | 916# | 918# |
Appearance
| Red white Yellow green | Red white Yellow green | Red white Yellow green | Red white Yellow green | Red white Yellow green |
Mixing proportion Of curing agent | 2-3% | 2-3% | 2-3% | 2-3% | 2-3% |
Operating time (hours) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Curing time (hours) | 3-4 | 3-4 | 3-4 | 3-4 | 3-4 |
Hardness (A°) | 20-23 | 26-30 | 26-30 | 12-16 | 26-30 |
Viscosity (cs) | 29000-34000 | 28000-32000 | 28000-32000 | 36000-39000 | 20000-24000 |
Tensile-strength ( kgf /cm) | ≥33 | ≥37 | ≥43 | ≥38 | ≥40 |
Tear-strength ( kgf /cm) | ≥19 | ≥23 | ≥24 | ≥26 | ≥26 |
Elongation-break ( % ) | ≥390 | ≥410 | ≥390 | ≥480 | ≥390 |
Retractility (%) | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3
|
Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net
skype: annie2012a
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.