200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namePad printing silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model901,902,912,916,918
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:05:36 GMT
HS code 39100000
Port shenzhen
Ship by sea
Certification SGS,MSDS,RoHS
Payment L/C T/T
Classification Chemical Auxiliary Agent
Appearance Fluid
Application pad printing silicone rubber for making pad
Sample free
Min Order200 kilogram
pad printing silicone rubber for making pad is mainly applied in printing of irregular patterns on plastic toys, electroplating products, decorations, electronic toys, trademarks, etc.
pad printing silicone rubber for making pad features:
pad printing silicone rubber for making pad with absorbing the ink easily, transfer patterns clearly, good resilience .It is a carrier which transfers the patterns from the steel plate onto the products’ surface. It has the advantage of good printing effects, fine quality, good resilience, and without any impurity.
pad printing silicone rubber for making pad datasheet:
Model | Appearance | Viscosity (cps) | Hardness (Shore A) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Shrinkage (%) | Elongation (%) | Mixing Ratio (%) | Operation Time (h) | Demould Time (hrs) |
901 |
|
| 25--28 |
|
|
|
| 2--3 | 0.5 | 2--4 |
902 |
|
| 25--28 |
|
|
|
| 2--3 | 0.5 | 2--4 |
912 |
|
| 25--28 |
|
|
|
| 2--3 | 0.5 | 2--4 |
916 |
|
| 25--28 |
|
|
|
| 2--3 | 0.5 | 2--4 |
918 |
|
| 18--20 |
|
|
|
| 2--3 | 0.5 | 2--4 |
pad printing silicone rubber for making pad picture:
pad printing silicone rubber for making pad operation:
pad printing silicone rubber for making pad is two-component silicone rubber, part A is liquid silicone rubber ,part B is catalyst .The usual mixing ratio for silicone rubber for pad printing and catalyst is 100:2-3,eg,we take 100 grams of liquid silicone rubber for pad printing, then we add 2-3 grams catalyst, and mix them evenly and pour it to your mold .Then after 2-4 hours , you will obtain a silicone rubber printing pad.
pad printing silicone rubber for making pad FAQ:
Why the printed pattern is incomplete or not clear?
1. If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.
2. If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.
pad printing silicone rubber for making pad certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
pad printing silicone rubber for making pad package:
our factory:
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.