200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameinjection moulding silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelhy-921 silicone
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:16:44 GMT
color transparent
Certifications RoHS.MSDS.SGS
Min Order200 kilogram
Aplication of Injection molding silicone for Food grade:
Injection molding silicone for Food grade press for medical tube, transparent products, diving glasses,etc.
Injection molding silicone for Food grade Typical Properties
The HY-921 is an injection molding liquid silicone rubber, which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥25KN/m)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Injection molding silicone for Food grade Standard Datasheet:
Item | HY-921 | |
Appearance | Transparent | |
Viscosity (Pa.S) | 400 | |
Density (g/cm3) | 1.07 | |
Hardness (A°) | 30 | |
Elongation at break (%) | 400 | |
Tear strength (KN/m) | 25 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
For get further information about our silicone , PLS contact with Miss Rose
Mobile:086-18938867525
TEL: 0086-755-89948294
FAX: 086-755-89948030
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.