Silicone Rubber make Shoe Molds

Shoe mold silicone rubber applications

Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.

Features of Shoe mold silicone rubber

a. shoe soles mold making

b. Two-component silicone rubber with tin-catalyst

c. Cured under room temperature

d. low shrinkage

e. excellent fexibility & easy demould

Shoe Mold Silicone Rubber hy218 Standard Datasheet:

Appearance: white
Viscosity(cp): ≤15000
Hardness(A): 18±2
Tensile strength(Mpa) ≥1.3
Tear-strength (kn/m) ≥5
Elongation break: (%)≥300
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4

Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25.C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested.

Shoe Mold Silicone Rubber Using Instruction:

Shoe mold silicone rubber is used for pouring or brushing technique. The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent.

a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.

b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.

c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.

For more information, please feel free to contact with 

Ms Sabrina

Tel:+86075589212382
Mobil:+8618938867574
Email:hyse(at)szrl(dot)com
Skype:sabrina369488
Web site:http://www(dot)szrl(dot)net

Sabrina will be at your servce any time