silicone rubber for shoe mold making,cast shoe mold
- US $6.55
200 - 40,000 kilogram
- US $5.88
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
model208#,218#
payment methodT/T, L/C, Westem Union
-
update timeSat, 09 Nov 2013 12:25:46 GMT
Paramtents
Color Any
silicone rubber:curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation silicone rubber for shoe mold making
Sample Available
HS code 39100000
Port Shenzhen
Packging & Delivery
Min Order200 kilogram
Briefing
1. resistance to deformation
2. high reproduction times
3. good tensile strength
4. exceptional fluidity
Detailed
silicone rubber for shoe mold making Application:
silicone rubber for shoe mold making is mainly used for shoe molds, sand casting, Shoe soles mold, sand casting,brushing mold,plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
silicone rubber for shoe mold making Specification:
1. silicon for shoe mold making with good aracteristics of easy-operation
2. Light viscosityand good fluidity of silicon for shoe mold making
3. Low shrinkage of silicon for shoe mold making
4. Favorable tension of silicon for shoe mold making
5. No deformatio of shoe soles molding silicon
6. Favorable hardness of silicon for shoe mold making
7. High temperatureresistance, acid and alkali-resistance and ageing resistanc
silicone rubber for shoe mold making Datasheet:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity cps | Shrinkage rate (%) | Elongation % |
208# | 100 : 2 | 30 | 2-4 | 25-30 | ≥ 10 | ≥ 8 | 15000 | ≤0.3% | 200% | |
218# | 100 : 2 | 30 | 2-4 | 20 | ≥ 8 | ≥ 4 | 7000-8000 | ≤0.3% | 200% |
silicone rubber for shoe mold making Picture show:
silicone rubber for shoe mold making Using Instruction:
The component A of silicone rubber for shoe mold making is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
silicone rubber for shoe mold making Notes:
silicone rubber for shoe mold making is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
silicone rubber for shoe mold making Package:
silicone rubber for shoe mold making Certification:
About us:
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents