200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620,HY-E625,Q-620,Q625
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:27:53 GMT
Color high translucent
high translucent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Appearance Fluid
Appliacation silicone insole
temperature resistance 150-200℃
HS code 39100000
Min Order200 kilogram
Applications of medical grade silicone rubber for gel insoles,silicone cushions :
Making silicon insole, Silicone Gel Toe Spreaders,Silicone Gel Arch Supports, Silicone Gel Metatarsal Pad, silicon pads, Silicone Gel Heel Cups
Advantage of medical grade silicone rubber for gel insoles,silicone cushions :
Description of medical grade silicone rubber for gel insoles,silicone cushions :
Medical silicone rubber for insole making is a kind of addition cure silicone rubber. It is primarily intended for silicone insole as a kind of foot care silicone rubber. With two component silicone rubber part A and part B, mixing ratio is 1:1. Generally the color is translucent or transparent.
Technique Data of medical grade silicone rubber for gel insoles,silicone cushions :
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
Operation of medical grade silicone rubber for gel insoles,silicone cushions :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Storage, shelf life and handling precautions of medical grade silicone rubber for gel insoles,silicone cushions :
1. Shelf life can be 12 months when stored at 25°C in tightly closed original packages.
2. Storage beyond the expired date does not necessarily mean that the product is no longer
usable. In this case , the properties required for the intended use must be checked for quality assurance reasons.
3. The curing agent may denature if the cap is left off after opening.Make sure to tightly seal the products prior to storage. Take particular care under conditions of high temperature or humidity.
4. If any of these products should come into contact with skin,wipe the exposed area with a cloth and then wash it thoroughly with soap.
Need any help on silicone rubber, please feel free to contact Ms Crystal:
Tel:86-755-89948294
Mob:86-15989267509
E-mail: hyxd(at)szrl(dot)net
Skype:shisi1991
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.