liquid silicone insole(platinum cure)

liquid silicone insole(platinum cure)  

1. Introduction of liquid silicone insole(platinum cure): 

liquid silicone insole is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making  masks, arms, legs, and other FDA molds application.

2. Application of liquid silicone insole(platinum cure):

liquid silicone insole could be mainly used for making silicone insoles, concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

3.Datasheet of liquid silicone insole(platinum cure):

4.Operation of liquid silicone insole(platinum cure):

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your

product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

5.Package of liquid silicone insole(platinum cure):

6.Certificationsof liquid silicone insole(platinum cure):

7.Company profile:

We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,addition cure liquid silicone,baby  nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc.

Need the price or other information for reference,please feel free to confirm with us some question at first

1) How about the size of your products?

2) Will you make the silicone mold by pouring way or brushing way ?

3) What's the raw material of your products ? Plaster? resin or other?

Then we will according it to recommend the most suitable RTV silicone with the best price for your reference

Any questions, please feel free to contact Mr Lucas:

TEL: 086-755-89212369

FAX: 086-755-89948030

MOBILE:086-18898736056

E-mail: hysj(at)szrl(dot)net

You can also send me E-mail by scanning QR Code below: