200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelmolding silicone rubber
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 13:17:12 GMT
Sample Free
Certification: SGS,MSDS,RoHS
Hardness: 25-40 shore A
Mixing Ratio: 2-3%
Shelf life 12 month
Operating time (hour 25 0C ) 0.5
Elongation-break(%) 180-450
EINECS No: 39100000
Curing time(hour) 3-5
Curing agent: 3%for free charged
Min Order200 kilogram
liquid silicone rubber for artificial stone mold making
1. Application for liquid silicone rubber for artificial stone mold making :
Liquid silicone rubber for artificial stone mold making is primarily intended for artificial stone molds, poly resin crafts, gypsum crafts, candles crafts, statue Buddha, relievo furniture, furniture decorative materials, building decoration materials, large-scale cement mold, artificial fossils Factory, simulation landscapes, animals and plants sculpture and so on.
2. Instruction for liquid silicone rubber for artificial stone mold making :
Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours.
1. Adding curing agent 1%, the silicone rubber can still be operated within 2.5 hours and can be Demoulded after 6-8 hours.
2. Adding curing agent 2%, the silicone rubber can still be operated within 50 minutes to 1 hour and can Be demoulded after 2-3 hours.
3. Adding curing agent 3%, the silicone rubber can still be operated within 28 - 30 minutes and can bedemoulded after 1.5-2 hours.
4. Adding curing agent 4%, the silicone rubber can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.
3.Standand datasheet of liquid silicone rubber for artificial stone mold making :
Model | Color | Mixing ratio (%) | Operation Time (mins) | Demould | Hardness ( A0 ) | Tensile-strength (MPa) | Tear-strength (kN/m) | Dynamic Viscosity | Shrinkage | Elongation |
time | (mPa.s) | rate (%) | (%) | |||||||
( hrs) | ||||||||||
625# | white/translucent | 100;3 | 30-40 | 3 to 4 | 25±2 | 3.4 | 24±2 | 25000±2000 | ≤0.3 | 410 |
630# | white/translucent | 100;3 | 30-40 | 3 to 4 | 30±2 | 4 | 26±2 | 27000±2000 | ≤0.3 | 420 |
638# | white/translucent | 100;3 | 30-40 | 3 to 4 | 38±2 | 4 | 25±2 | 25000±2000 | ≤0.3 | 450 |
640# | white/translucent | 100;3 | 30-50 | 4 to 5 | 40±2 | 3.5 | 21±2 | 15000±2000 | ≤0.3 | 180 |
4.Steps of liquid silicone rubber for artificial stone mold making :
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Any questions, please feel free to contact Mr Lucas:
TEL: 086-755-89212369
FAX: 086-755-89948030
MOBILE:086-18898736056
E-mail: hysj(at)szrl(dot)net
You can also send me E-mail by scanning QR Code below:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.