BG-GX35B Honda GX35 Brush Cutter

Honda GX35 Brush Cutter
1.Engine: Honda GX35
2.1.53m aluminum shaft
3.40teeth blade
4.CE, GS approval

Honda GX35 Brush Cutter
1.Engine: Honda GX35
2.1.53m aluminum shaft
3.40teeth blade
4.CE, GS approval

Egnine of BG-GX35B Honda GX35 Brush Cutter

Engine model	GX35
Engine type	4-stroke,air-cooled,single cylinder gasoline
Displacement	35cc
Rated power	1.18/7000(kW/ r/min)
Fuel tank capacity	800ml
Start system	recoil
Lding speed	3000-3200r/min
Fuel	90# gasoline
Carburetor	pump-film type
Fuel oil consumption ratio	≤0.6(kg/h)

 

 Rated Matching of BG-GX35B Honda GX35 Brush Cutter

Type	backpack
Rotate speed	200-3400 r/min
Drive transfer style	automatic centrifugation
Rotating direct of blade	anticlockwise
Blades	40T
Blade diameter	305(mm)
Max. cutter width	40mm
Engine carton	34*34*45cm
Shaft carton	150*15*12cm
G.W	11KG

 

a.  Multi-function tookits                      b. Blades                          c. Oil seepage                                  d.  Grass plate

 

Advantages of BG-GX35B Honda GX35 Brush Cutter 

a. pipe length: 1.65m/1.25m, ect also can be chosen
b. pipe material: stainless steel/ aluminum
c. blade: nylon type/ straight/3T/4T/8T/30T, etc
d. engine: 1E34F/TU-26/1E36F/1E40F-5/139F/GX35, etc. can be matched as you need
e. type: side hang/ backpack
f. packing can be made as your requirements

 

• Daily Maintenance of BG-GX35B Honda GX35 Brush Cutter

1,Clean the surface of the machine.

2,Clean the Air cleaner, use gas to clean the filter core.

3,Check all the connections whether there is leakage of oil or air.

4,Check all the screws of the engine cover to see if there are the loose or lost. If there is, please screw tightly or replace.

5, Cover the machine with plastic film and store it in dry and well ventilated.

• Long-time Storage of BG-GX35B Honda GX35 Brush Cutter

1, Drain the fuel out of the tank completely.

2, Clean the Air cleaner carefully and reassemble it.

3, Disassemble the plug and inject a few drops of the mobile oil into the burning chamber. Pull the starter and make the piston stay at the proper place.

4, Disassemble the blade, smear a few mobile oil on each side.

5, Clean very parts carefully and smear the damage one.

6, Check each parts and replace the damage one.

7, Store the brush cutter in a dry and well ventilated place.

 

Item No.	CG430A	BGGX35	CG430	CG430G
Power	1E40F-5 1.25Kw	GX35 1.3Kw	1E40F-5 1.25Kw	1E40FN 1.3Kw
Type	Side-attached	Backpack	Side-attached	Side-attached
Blade	40T	Straight	3T	Nylon
Shaft	1.6m	1.35m	1.25m	1.5m