silicone rubber for body part casting
silicone rubber for body part castingsilicone rubber for body part castingsilicone rubber for body part castingsilicone rubber for body part castingsilicone rubber for body part casting

silicone rubber for body part casting

FOB Price
  • US $8.88

    200 - 1,000 kilogram

  • group namePlatinum cure Silicone Rubber

  • Min Order200 kilogram

  • brand nameHong Ye silicone rubber

  • modelHY-E625 silicone rubber

  • payment methodL/C, T/T, Western Union

  • update timeFri, 30 Oct 2015 19:33:43 GMT

Paramtents

  • color any color

  • hardness 0-40 shore A

  • MOQ 200kg

  • payment L/C,T/T,WU

Packging & Delivery

  • Min Order200 kilogram

Briefing

silicone rubber for body part casting advantages:food grade,no poison,environmental protection,easy operation

Detailed

silicone rubber for body part casting

Description of silicone rubber for body part casting

HY- E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making  masks, arms, legs, and other FDA molds application.

Applicationsof silicone rubber for body part casting

HYE625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, candle molds, cake molds,seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E625# molding silicone

Model

HY-E625#

Appearance

Translucent

Mixing Ratio

1:1

Operating time (Mins 25°C)

30-40

Curing time (Mins 25°C)

2-4h

Hardness (A°)

25±2

Density ( g/cm 3 )

1.08

Viscosity (CS)

6000 ± 2000

Tensile-strength( kgf /cm2 )

25 ± 2

Tear-strength (kgf /cm2 )

>16

Elongation-break(%)

380 ± 50

Retractility(%)

≤0.1

OPERRATING INSTRUCTION of silicone rubber for body part casting:

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFEof silicone rubber for body part casting:

Twelve (12) months from date of shipment when stored at 24 in original unopened packages.

PACKAGEof silicone rubber for body part casting:

Packed in clean 20kg/pail, 200kg/pail.


Any more information abt liquid , pls feel free to contact Ms. Ivy:

Mobile: 0086-18938867558

Tel: 0086-755-89948006

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email:hyse(at)szrl(dot)net

Skype:silicone0004

Send Inquery

Email
Mobile
Content

I agree to the rules that follow the message

Nearest port for product export
Shenzhen, Guangzhou, xiamen, Shanghai
Delivery clauses under the trade mode
FOB, CFR, CIF, EXW
Acceptable payment methods
T/T, L/C, Westem Union
Export mode
Export through agents
Contact Suppliers