DOUBLE COLUMN MACHINING CENTER SP-1530

contact supplier

Paramtents

High rigidity and nice design

1. Main specifications and parameters

Machine type		SP-1530
Worktable	Worktable size	1300*3000	mm
	Load bearing of worktable	5000	kg
	T-slots(N x M)	Center: 7-22x160	mm
Products Range	Longitudinal travel X axis	3100	mm
	Cross travel Y axis	1650+160(tool changing)	mm
	Vertical travel	800	mm
	Distance between spindle nose to worktable surface	150-950	mm
	Distance between two columns	1400	mm
Spindle	Spindle taper	BT50/Φ190
	Spindle motor	FANUC β iIP30/6000 15/18.5KW
	SERVO MAIN MOTOR RATED OUTPUT TORQUE	143	Nm
	Speed range	40-6000(direct)	rpm
Feed	Rapid feed speed X axis	10	m/min
	Rapid feed speed Y axis	10	m/min
	Rapid feed speed Z axis	10	m/min
Tool Magazine	Tool magazine model	MANIPULATOR
	Capacity	24	T
	Max. Tool diameter	Φ110/200	mm
	Max. Tool allowable weight	18	kg
	Max. Tool allowable length	300	mm
	Tool change time	3s(T-T)
	Tool change way	Arbitrary
	Max. Cutting feed speed	8000	mm
Accuracy	Positioning accuracy	±0.03	mm
Accuracy	Re-positioning accuracy	±0.018	mm
Accessories	Dimension of three axis guide rail（XYZ）	X axis 2-45# roller type linear guideway
		Y axis 2-45# roller type linear guideway
		Z axis box type guideway
	Diameter of three axis screw（XYZ）	X axis Φ6316
		Y axis Φ5016
		Z axis Φ5016
MACHINE ELECTRIC CAPACITY		63	KVA
MACHINE COMPRESSED AIR		6	kg/c㎡
POWER REQUIREMENT		380V±10% 50Hz
Machine weight		24000	kg
Machine dimension		7800×5500×5000	mm

2. Standard accessories

Item	Standard accessories
1	Main driving system（include spindle, main motor etc）
2	FANUC CNC system（include main motor, servo motor, driver, amplifier etc）
3	Three axis servo drive system( linear guide, ball screw etc）
4	Main part（include base, worktable, column etc）
5	Hydraulic balancing system（include balance cylinder, air reservoir, pressure pipe etc）
6	Automatic lubrication system( include lubricant pump, allotter etc）
7	Automatic chip conveyor（include 2 screw type and 1 chain type）
8	X、Y axis internal protection

3. Optional accessories

Item	Optional accessories
1	controller: SIEMENS 828D or MITSUBISHI
2	chain type tool magazine with 32T
3	Heidenhain linear encoders(three axis)
4	spindle inner cooling or high pressure water pump
5	Tool setter(RENISHAW)
6	Taiwan GTP double speed gearbox
7	Taiwan brand fourth axis
8	Right-angle milling head