Xinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificate
Xinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificateXinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificateXinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificateXinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificateXinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificate

Xinder WL-D-880U hydraulic wheelchair lift load 250KG with and CE certificate

  • group nameWheelchair lift for van

  • Min Order1 piece

  • brand nameXINDER

  • modelWL-D-880U

  • payment methodT/T, Western Union, paypal

  • update timeThu, 24 Sep 2015 16:34:20 GMT

Paramtents

  • type One Cylinder Hydraulic Lift

  • Certification CE

  • Lifting Capacity 350kg

  • Platform Dimention 1150*720 mm

  • Max floor height 880mm

  • Voltage 12v/24v

Packging & Delivery

  • Size120cm x 60cm x 140cm

  • Weight207kg / piece

  • Min Order1 piece

Briefing

CE certification
loading capacity:350kg
easy operation

Detailed

A. ADVANTAGES

 

¨ Automatic Inboard and Outboard Rollstops

 

¨ powerful hydraulic pump ensure smooth, stable operation for heavy wheelchairs and scooters

 

¨ all-steel frame features convenient handrails for increased comfort and security

 

¨ stable, non-skid platform with automatic inboard and outboard rollstops accommodates most wheelchairs and

scooters

 

¨ pre-lubricated bearings at all major pivot points offer long-term durability

 

¨ high gloss, polyester powder coat finish resists corrosion

 

¨ built in manual backup system

 

¨ Compact design, quiet and smooth operation

 

¨ Easy to maintain

 

B. INTRODUCTION

 

WL-D series Dual-Arm wheelchair lift provides an easy access for the people in wheelchair to get in/out of vehicles. The platform can move smoothly, reliably and safely, whose loading capacity can be up to 350kg.

 

There is electrical &hydraulic control system in WL-D series wheelchair lift, which can operate lift to extend, stow, lift and lower down. Lift performance is controlled by standard controller which can be wire control or remote control. Moreover, there is manual equipment for manual operation.

 

Maintenance free bearing is used at hinged joint, so that this lift is easy to maintenance. This lift will take up little vehicle space because of the exquisite and compact design and completely steel structure.

 

C. TECHNICAL SPECIFICATION

 

 

 

Loading capacity

Own 

weight

Electric 

system

Max working 

pressure

Platform dimension

Max floor 

height

350 kg

134 kg

12-24 Volt

14 Mpa

1150*720mm/1250*820mm

880 mm

 

 

Model

Operation

Working Method of 

front and rear 

rollstop

Position of 

Hydraulic pump

Application

WL-D-880

Electric and manual

Automatic

Inside vehicle

Van, minibus

 

 

 

Certifications

WHELECHAIR LIFT CE CERTIFICATE

ES CE CERTIFICATE

The CE mark, or formerly EC mark, is a mandatory conformity marking for certain products sold within the European Economic Area (EEA) since 1985.[1] The CE marking is also found on products sold outside the EEA that are manufactured in, or designed to be sold in, the EEA. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area.

It consists of the CE logo and, if applicable, the four digit identification number of the notified body involved in the conformity assessment procedure.

The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives.[2]

The actual words signified by "CE" have been disputed. It is often taken to be an abbreviation of Conformité Européenne, meaning "European Conformity".[3] However, "CE" originally stood for "Communauté Européenne", French for "European Community". In former German legislation, the CE marking was called "EG-Zeichen" meaning "European Community mark". The CE marking is a symbol of free marketability in the European Economic Area (Internal Market)

 

 

Our Services

 After-sales Service

Xinder-Tech warrants the original buyers that Xinder-Tech will repair or replace any part failed due to defective material or workmanship during warranty period. Details are as follows:

 

    Warranty Period:

  • Ø  Warranty Period: 12 Month from the delivery date from seller.
  • Ø  Repair or replace parts failed due to defective material or workmanship during warranty period.
  • Ø  Repair or replace parts of power units failed due to defective material or workmanship during warranty period.
  • Ø  The parts can be got from Xinder-Tech Electronics.

Send Inquery

Email
Mobile
Content

I agree to the rules that follow the message

Nearest port for product export
SHANGHAI, SHENZHEN
Delivery clauses under the trade mode
FOB, CFR, CIF, EXW, Express Delivery
Acceptable payment methods
T/T, Credit Card, PayPal, Westem Union, Cash
Export mode
Have the independent export and import right
Contact Suppliers