M2I H TOP Series HTOP05TQ-SD-W Panel Glass Overlay

  • group nameM2I

  • Min Order1 piece

  • brand nameVICPAS

  • modelM2I HTOP05TQ-SD-W

  • payment methodWestern Union, T/T, PayPal, Credit Card

  • update timeFri, 01 Nov 2024 07:28:56 GMT

Paramtents

  • Brand M2I

  • Size 5.7 inch

  • Warranty 365 Days

  • Product Line M2I H TOP Series

  • Supply HTOP05TQ-SD-W Protective Film HMI Panel Glass

  • Shipping 2-4 workdays

  • Part Number M2I H TOP Series HTOP05TQ-SD-W

Packging & Delivery

  • Min Order1 piece

Briefing

M2I HTOP05TQ-SD-W Front Overlay Touch Screen Glass Repair. 365 Days Warranty-Fully Tested-Factory Prices-Fast Shipping.

Detailed

M2I H TOP Series HTOP05TQ-SD-W Protective Film Touch Digitizer Glass Replacement

Order each part separately is available

M2I H TOP Series HTOP05TQ-SD-W Front Overlay Touch Screen Panel Repair Replacement

Fixing

Install clamps with M2I HTOP05TQ-SD-W Touch Screen Monitor Front Overlay product should be installed as follows to maintain the IP performance of the device.
a.Insert the clamp into the slot of the product.
b.Screw the unit into the HTOP05TQ-SD-W Front Overlay Touch Membrane panel cut with a screwdriver. If the screw is over tightened, it may cause the front deformation, thus resulting the touch sensor Can't work properly Tighten the screws to a torque of 0.2 N.m.


Setting System Recovery Mode of HTOP05TQ-SD-W Protective Film Touch Digitizer Glass

a.If the system fails to boot normally due to a problem during operation, the built-in recovery function can be used to maintain the factory default state. Please note that the built-in project will be deleted when using the recovery mode.
b.After opening the HTOP05TQ-SD-W Protective Film Touch Screen Monitor rear cover, you can adjust the setting switch. Keep the "BOOT UP"state when booting normally. If the system is recovering, turn off the power and set it to "RECOVERY".
c.When the recovery of M2I HTOP05TQ-SD-W HMI Panel Glass Front Overlay is completed, the buzzer sounds, then turn off the power and reset to "BOOT UP" state.




Specifications:

The table below describes the parameters of the M2I HTOP05TQ-SD-W Protective Film Touch Panel HMI Parts.

Display Color: 65536 Color
Brand: M2I
Display Type: TFT Color
Display Resolution: 320 x 240 Pixels
Operation Temperature: 0°C ~ +50°C
Storage Temperature: -10°C ~ +60°C
Product Line: M2I H TOP
Display Area: 115.2 x 86.44 mm
Part Number: HTOP05TQ-SD-W
Ambient Humidity: 85% RH or less


Related M2I HMI Part No. :

M2I HMI Description Inventory status
HTOP05TQ-SD M2I H Top Series Touch Screen Film Front Overlay Replacement In Stock
HTOP05TQ-SD2 M2I H Top Series Protective Film HMI Panel Glass Repair Available Now
HTOP05TV-SD M2I H Top Series HMI Touch Glass Protective Film Repair Available Now
HTOP05TV-SD2 M2I H Top Series Touch Screen Display Front Overlay Replacement In Stock
HTOP05TV-SD-W M2I H Top Series Protective Film HMI Panel Screen Repair Available Now
TOPRW0500WD M2I TOPRW Series Touch Digitizer Front Overlay Replacement In Stock
TOPRW0700WD M2I TOPRW Series Touch Screen Film Protective Film Repair Available Now
TOPRW1000WD M2I TOPRW Series Front Overlay Touch Digitizer Glass Replacement In Stock
M2I HMI Description Inventory status


M2I H TOP Series HMI Manuals PDF Download:

  • Strengthen Customer's Industrial Value
  • M2I Corporation Industrial HMI Touch Panel HW Installation Manual
  • TOPPCVIEW Catalog

  • FAQ:

    Question: What is the case material of M2I HTOP05TQ-SD-W Front Overlay Touch Panel Terminal?

    Answer: The case material is PC(Flameless).


    Question: What is the cooling system of H TOP Series HTOP05TQ-SD-W Touch Membrane Protective Film Machine?

    Answer: The cooling system of HTOP05TQ-SD-W is natural air circulation.


    Question: What is M2I H TOP Series HTOP05TQ-SD-W Touch Screen and Protective Film HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.

    Common misspellings: 

    TOP05TQ-SD-W
    HTOP5TQ-SD-W
    HTOP05TQ-SDW
    HTOP055TQ-SD-W
    HTOP05TQ-S-DW
    Nearest port for product export
    Guangzhou, Hongknog, Shenzhen, Taiwan
    Delivery clauses under the trade mode
    FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
    Acceptable payment methods
    T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow
    Contact Suppliers

    Follow this Suppliers