STANDARD CONFIGURATION:
MECHANICAL-DRIVEN, CRAWLER-TYPE, 2.5-6M PAVING WIDTH, QUANCHAI (WATER COOLED) DIESEL ENGINE, MECHANICAL-ELECTRICAL-HYDRAULIC INTEGRATION TECHNOLOGY, HYDRAULIC EXTENDABLE SCREED, CANOPY.
Category | Item | Unit | Technical parameter |
Technical parameter | Basic paving width | m | 2.5 |
Maximum paving width | m | 6.0 |
Maximum paving thickness | mm | 10-250 |
Paving speed | m/min | 2.03-6.07 |
Traveling speed | km/h | 1.55-4.62 |
Hopper capacity | t | 10 |
Diesel engine | Diesel engine model | / | 4JR3SG7 |
Rated power/speed | kW/r/min | 55/2000 |
Masses | Overall mass | t | 11-12 |
Overall size | Length | Mm | 5820 |
Width | Mm | 4534 |
Height | mm | 2995 |
LTL60C ASPHALT PAVER
LTL60Casphalt paver is suited to pave asphalt material It is widely used for the
construction of highway, urban road, plaza, and parking lots etc.
The machine is mechanical - hydraulicdriving and is equipped with double hydraulic extension screed and automaticleveling unit. LTL60C asphalt paver can pave the road with good leveling andhigh density. The vulnerable parts use advanced wearable material to secure theperformance.
TECHNICALSPECIFICATIONS
Model: LTL60C
Type: Crawler
Parameter
Paving Width (mm) 2500-6000
Paving Thickness (mm) 10-250
Traveling Speed(km/h) 1.55~4.62 km/h
Paving Speed (m/min) 2.03~6.07 m/min
Smoothness 3mm/3m
Max. Theoretical output (t/h) 220
Hopper Capacity (t ) 10
Maximum climbing capacity 20%
Overall weight 11-12t
Overall Size 5820*6034*2995
(transportation size:5820*2494*2450)
Engine 4JR3AG7 water cooled 4 cyclinder
55Kw/2000r/min
Dieseltank 118L
DriveSystem
The whole machine isdriven mechanically-hydraulically. Flywheel end of engine is connected withtransfer case. The front of engine is connected with split flow pumps to supplypower to the components as follows:
1. crawler traveling devices
2. conveyor and auger feeder
3. tamper and vibrating device
4. hopper folded in & out, screed up& down and other cylinders action
TravelingDevice
It consists of gearbox, transfer case, traveling clutch and chain transmission.
The driven chainwheel activates the crawler.
WeightBearing Mode
There are twocrawlers. Crawler patches are configured with rubber. Each crawler ground toucharea is 2672×300mm.
Steering
The traveling clutchis operated by hydraulic cylinder. The brake can make the machine turn atoriginal place.
Hopper
The capacity is 10tons and operated by hydraulic cylinder for entire discharge.
PushRoller
The roller can swingto push the truck rear wheels.
Conveyor
Left and rightconveyor is independently driven. Clutch is controlled by hydraulic cylinder.
FeederSystem
The system uses screwfeeder which blades are of high wearable material and are easily replaced.
ElectricalSystem
The system isequipped with two batteries. The voltage is 24V.
Canopy
It is consisted ofsteel tube and cloth.
AutomaticLeveling Sensors
It has twolongitudinal used for automatic grade adjustment.
WorkingDevices
Doublehydraulic extension screed
1.Screed basic width 2500mm
arch of max paving 0--4%
2.Vibration frequency 0~50 Hz
3. Extended screed 0.75mm 2 segments
PACKING & SHIPMENT
Nude packing, shipped by bulk vessel or RO-RO vessel with disassembled components and canopy.