Outdoor Fiber Optic Termination Box 48 Core Wall Mounted Enclosure Box For FTTB

 

48Core fiber optica Splitter Distribution Box is widely used in the FTTH & FTTB application.. The cabinet is made of high reinforced cold-rolled steel material. The cabinet inner is designed in singal layer rolling panel inside, easy to control, space saving. This product is used for fixing the cable , welding , shunt and storage .it is an important part of FTTH & FTTB.

 

1. Features:

 

1. The box is made from high reinforced cold-rolled steel material with powder coated.

2. Water-proof design, sealed by super quality seals, effectively prevent the water penetration. 

3. It can be opened for 120 degree, operable sapce is large. 

4. Can be used for two 1x24 cores plc splitter. 

5. Support OEM or ODM service.

 

2. Application:

1. FTTH

2. FTTO

3. Fiber to the desk

4. The new-building,extension and rebuilding of optical fiber cable project.

  

3.Technical Standard:

 

No.	Test Item	Unit	Requirement	Test Result	Test Conclusion
1	Mechanical Strength Test of Box Surface	……	Put 500N vertical pressure on every surface of the box for 15min; after unload, the box should not have depredation or permanent deformation	Conformance to Requirements	Pass
2	Mechanical Strength test of the door	……	Open the door, put 100N vertical pressure on the outermost tip of the door for 15min; after unloading, the box should not have depredation or permanent deformation	Conformance to Requirements	Pass
3	Tightness test	……	Nozzle diameter 6.3mm, 2.5m-3m away from the tested object, spray water in all directions to the shell, water flow rate: 2.5L/min±5%, duration of at least 3min, no water drop in the box	Conformance to Requirements	Pass
4	Low-temperature test	……	Test temperature (-40±2)℃, duration of 2h; after the test, the box should not have depredation or permanent deformation	Conformance to Requirements	Pass
5	High-temperature test	……	Test temperature (60±2) ℃, duration of 2h; after the test, the box should not have depredation or permanent deformation	Conformance to Requirements	Pass
6	UV Test	……	Under exposure to 60 ℃ and normal temperature of 18w aging test UV light respectively for 8 hours, circulate for 5 times, no discoloration	Conformance to Requirements	Pass

FAQ:

 

Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.

Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.

Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.

Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed

Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.

Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)

Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.

 PRODUCT QUALITY ASSUANCE:

To guarantee stable performance and provide the best products to users, our company has strict control on design, 

raw material and process pursuing details and challenging perfection.

Characteristics:

1. It is composed of case body, fiber optical splice tray and adaptor fixing frame.

2. It is devided into two parts, one links with optical cables for fusion connection between optical cable and fiber pigtail and 

another links with patch cord. Combine fusion and connection, surplus fiber holding, and patch cord holding in integration.

3. Surplus fibers can be twisted around two special plastic rings, which ensure the bending radius is bigger than 40mm.

4. Adopt 6 ports adaptor fixing frame to fix adaptors which available for different types of adaptors, easy for operation and avoid any unexpected damage to fiber.

5. Cable can lead in from the bottom of the box, the entry is under the protection of special rubber parts.

COMPANY INFORMATION:

ADVANCED PRODUCTION EQUIPMENT

We offer support and technical expertise in both the newest and existing technologies.

PRODUCTION AND PROCESS:

Genesis is growing rapidly. Now our company plant covers a workshop area of about 1200 square meters, with more than 500 workers. 

We are dedicated to providing reliable, high-quality and cost-effective products to our new & old customers.

PACKAGING & SHIPPING.

All fees and charges will be calculated according to weight, volume and shipping method of the materials our customers order.

Any extra charge caused by additional services, such as purchaser's carrier of special handling at the destination, must be paid by consignee of purchasers.

Application:

Telecommunications subscriber loop; Fiber to the home (FTTH); LAN/WAN; CATV.

PROJECTS SHOW:

Genesis's fiber optic cables used in metro.airport,highway.nuclear power station,Garrison,Television building,Civic centre,ect projects.

Our Customer:

GENESIS COMPANY CONTACT:

Address: Bldg. 1, Zhongtai Industrial park, Donghuan 1st Road, Longhua New Dist.,

TEL: 0086-0755-23778221
FAX: 0086-0755-23778221
PHONE: +86 15112525915
Skype: michael88251
E-mail: ceo..........com