Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber

  • group nameBattery Test Machine

  • Min Order1 piece

  • brand nameHUDA Test Machine Manufacturer

  • modelHUD-H203

  • payment methodL/C, D/A, D/P, T/T, Paypal

  • update timeFri, 10 Dec 2021 16:54:51 GMT

Paramtents

  • Inner box size 500x500x500mm

  • Dimension 680x750x1475mm

  • External material cold-rolled steel plate with paint treatment, thic

  • Internal materia SUS#304 thickness 1.2mm

  • Number of cabinets 2

  • Control mode metal button control

Packging & Delivery

  • Min Order1 piece

Briefing

Battery explosion-proof test chamber is mainly used for over-charge and over-discharge of the battery...

Detailed

Battery Explosion-Proof Testing Machine

Battery Explosion-proof Testing Chamber is mainly used for charging and discharging of battery.Put the battery in explosion-proof chamber and connect charge and discharge tester to protect the operator and equipment. The body is made of steel material with strong texture and well explosion protection.

Test Standard

  • UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III
  • IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"
  • GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
  • GB31241-2014  "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
Parameters

1. Inner chamber size

 500x500x500mm (width x depth x height);

2. Dimensions

 680x750x1475mm (width x depth x height, including door lock);

3. External material

 cold-rolled steel plate with paint treatment, thickness 1.5mm;

4. Internal material

 SUS#304 thickness 1.2mm;

5. Number of cabinets

 2;

6. Box door

 a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;

7. Teflon tape is attached to the inside of the box, which is effective in insulation and flame retardant, easy to clean;

8. There are test holes on the left side of each layer of the box, which is convenient for the test connection line to pass through;

9. Each test box has a lighting and smoke exhaust interface, and there is an interval design between each layer to avoid mutual influence on the test;

10. Control mode

 metal button control ;

11. Pressure relief door size

 200x200mm; Located at the back of the box, when the sample explodes, the pressure relief port will pop open to relieve the pressure;

12. Smoke exhaust pipe

 diameter φ100mm, located at the back of the box;

13. Observation window

 Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh;

14. Equipment movement

 There are four universal casters at the bottom of the equipment, which can move freely;

15. Lighting device

 It is convenient to observe the state of the tested sample;

16. Power supply

 1∮; AC220V; 50-60HZ

Details

Observation Window

Easy to observe the condition of the sample at any time

Inner Chamber

SUS#304 thickness 1.2mm

Double Handle

Silicone compression strip + explosion-proof chain handle

Separate Exhaust & Lighting System

Independent setup and testing

6YRS haiyouda

Nearest port for product export
ShenZhen, HK
Delivery clauses under the trade mode
FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
Acceptable payment methods
T/T, L/C, D/P D/A, Cash
Contact Suppliers

Follow this Suppliers