Square Punch Processing Injection Mold Components For Automobile Connector

Machining Difficulties

The injection mold parts processing difficulties are two, they are mainly concentrated in the head position of parts. Difficult one, grinding into the round; difficult two, discharge processing. In our factory, some parts grinding is the use of punch forming machine and are manually produced. You know, the accuracy of our grinding can reach 0.005 mm, manual operation requires patience, concentration, careful and exquisite technology as a strong support. In addition, discharge processing, in the current supply market, many factories are not available, a factory that offers a precision of 0.002 mm is even scarcer. Since its inception, our company has been focused on the processing of precision mold parts, although the processing category is limited, but we can do very well. With the Chinese saying, this is asked “I have successively, specialize in.”.

Characteristics of This Part

1. Materials used: 1.2343 ESU is the material of this injection mold part. 

2. Processing involved: There are plane grinding, EDM, WEDM and punch processing.

3. Related equipment: Plane grinders, MITSUBISHI spark machines, Wire EDM machines and Punch forming machines.

4. Detection tools used: 2.5D projector, two dimension, height gages from differernt brand, hardness meter and so on.

5. Quality control process: In our factory, quality control is divided into the following steps:

• Raw material quality assurance, we buy materials in the regular store and can provide customers with material proof.
• The experienced engineer will confirm the drawings so that we can do them well.
• During processing, each process is checked by the master who is in charge of production.
• The component will move to the next step until there is no problem with the workpiece.
• When the parts are machined, the final inspection shall be carried out by our quality inspector, and the inspection report shall be submitted to the customer.

Product Description