UCFL204 2 Bolts Flange Housed Bearing Unit 20mm SUNBEARING

  • group namePillow Block Bearing

  • Min Order1 piece

  • brand nameSUNBEARING Rolling Bearing Manufacturer

  • modelUCFL204

  • payment methodL/C, Western Union, T/T, Paypal

  • update timeThu, 20 Oct 2022 16:44:35 GMT

Paramtents

  • Color Silver

  • d 20 mm

  • H 113 mm

  • U 33.3 mm

Packging & Delivery

  • Min Order1 piece

Briefing

UCFL204 bearing will cope with initial misalignment, are sealed, and pre-greased.

Detailed

UCFL204 2 Bolts Flange Housed Bearing Unit 20mm SUNBEARING

UCFL204 bearing
Product Name
Pillow Block Bearing UCFL204
Structure
Pillow block Bearing
Locking Device
Set Screw
d
20 mm
Seal Type
Contact
H
113 mm
Set screw
M6x0.75
U
33.3 mm
 Hexagonal key size for set screw
3 mm
Designation, housing
FL204
Recommended tightening torque for set screw
5.5 Nm
The Designation, Radial Insert Ball Bearing
UC204
End Type
Open
Sealing solution
Standard seals with additional flingers
Performance
Light Duty
A
25.5 mm
Operating Temperature Range

-40 to 250 ºF

-40 to 120 ºC

Product weight:
0.44  kg
Rotational Speed [Max]
6700 RPM
Housing Material
Cast Iron
Mounting Hole Center-to-Center (e)
15 mm
Dynamic Load Rating (Cr)
12.7 kN
S
12.7 mm
Static Load Rating (Cor)
6.55 kN
Mounting Slot Width (S1)
18.3 mm
Lubrication
Non-Relubricatable
N
12 mm

UCFL204 Bearing Features

UCFL204 bearing will cope with initial misalignment, are sealed and pre-greased, have integral shaft locking, and simply bolt into place.


The internal structure of the insert ball bearing is the same as that of the deep groove ball bearing. But the inner race of this bearing is wider than the outer race. The outer race has a spherical surface. Insert ball bearings can self-aligning with the fit between the outer race and the bearing block. Insert ball bearings are compact. It’s easy for loading and unloading. Spherical insert ball bearings often used in mining, metallurgy, textile, transportation machinery, etc. 

ucfl bearing drawing

Pillow Block Bearing

Pillow Block Bearing UCP or NP Series Plummer / Pillow Housings: Supplied with a fully sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required.
Benefits: Cost-effective bearing/housing assembly, re-lubricative, replaceable insert, grub screw fixing