group nameThe safety edge is used on the edges of parts that are dangerous to crush and shear.
Min Order1 piece
brand nameCYNDAR
modelLS-PSE
payment methodT/T, PayPal
update timeMon, 08 Feb 2021 16:55:24 GMT
Maximum sensing angle <90°
Detection method Pressure sensing method
Mechanical life >3,000,000 times
Min Order1 piece
The safety edge is a belt type safety switch, and the safety edge or safety buffer can be classified as a "belt" device. The safety edge completely relies on its sense and switching ability to provide safety protection, so reliable control of the safety edge or the control circuit of the safety buffer is very important. Usually the safety edge or safety buffer is only used on machines where the moving parts can be stopped immediately after the power is removed.
Installation Precautions
1) Do not lift or move the Safety protection edge by pulling the cable.
2) Please use a dedicated bracket to install the Safety edge sensor.
3) Do not fold or punch holes on the Anti-collision safety touch edge.
4) Do not install the Safe edge protection on the raised area, but install it on a smooth and smooth surface.
6YRS GZ Cyndar Co., Ltd
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.