Drive-in racking

Drive-in racking is also called corridor-type racking, composite structure, specialized high-intensity drive-in brackets, high-strength drive-in beam, frames are connected to top beams by bolts&nuts.

The depth of the single side drive-in racking which is against the wall should not be more than 6 pallet locations, and that of double side drive-in should be less than 12 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking.

 It’s best to make drive-in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system.

The drive-in racking should be equipped with back, top cross beams, etc. to stabilize the racks.

This type of racking is densely arrayed, making full use of storage space; both “first in first out” and “first in late out” are available, suitable for storing few types of goods with large quantity. Widely used in milk, drink industry, and also be welcome by cold storage.

Model: NH heavy duty drive-in racking 

Specification:

Upright:    NH1 TYPE (80 TYPE),NH2A TYPE(90A TYPE)

NH2B TYPE(90BTYPE),NH3 TYPE(100 TYPE)

NH4 TYPE(120 TYPE),NH5 TYPE(140 TYPE),NH6 TYPE(160 TYPE)  

The non-standard ones can also be customized by clients. 

1) Designed for storaging few varieties and large quantities of similar
goods with very high space utilization
2) Goods are storaged and removed from the same side, or done from the
opposite side in accordance with the first-in first-out principle
3) specially suitable for standard goods units