NC servo 3 in 1 steel straightener,feeder and uncoiler
group name3in1 Feeder
-
Min Order1 piece
brand namekingjime
modelTNCF series
payment methodL/C, T/T
-
update timeWed, 01 Apr 2015 11:26:55 GMT
Paramtents
coil thickness 0.15-8.0mm
coil width 75-1600mm
length of feed 0-9999.99mm
Packging & Delivery
Min Order1 piece
Briefing
I. Feeding feature by PLC program from MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC p...
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC p...
Detailed
NC servo 3 in 1 steel straightener,feeder and uncoiler
I.Introduction of steel feeder
Servo driven feeds share many of the advantages with the press driven variety, such as minimal space requirement, low maintenance, and high speeds. However, servo feeds also provide benefits that press driven units cannot. The fact that they utilize a microprocessor based control gives them an added dimension. Features such as programmable move patterns, self diagnostics, auto correction, and the ability to communicate with automation - just to name a few - set them apart from other types of feeds.
II. TNCF Standard Accessory
| 1.upper roller adjustment by digital watch . | |||||||||
| 2.Coil width adjusted by double handle wheel with precise screw rod . | |||||||||
| 3. Pass line can be adjusted by the lifter driven by motor . | |||||||||
| 4.Coil side guide use one set hollow rolls mechanical back gauge device. | |||||||||
| 5. Pinch roll and straightener roll material:high-strength alloy bearing steel with hard chrome plating. | |||||||||
| 6.Hydraulic coil arm device . | |||||||||
| 7.Motorized Snuber roll . | |||||||||
| 8.hydraulic guider . | |||||||||
| 9.hydraulic peeler table . | |||||||||
| 10.Mitsubishi PLC control feeding program from Japan . | |||||||||
| 11.Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer . |
III. standard type
| Ltem / Model | TNCF6-400 | TNCF6-500 | TNCF6-600 | TNCF6-700 | TNCF6-800 | TNCF6-1000 | TNCF6-1300 | TNCF6-1500 | |||
| Width of Material(mm) | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 | 75-1500 | |||
| Thickness of Material(mm) | 0.8-8 | ||||||||||
| Max.coil Weight(kg) | 3T weight can be customized | 5T weight can be customized | 8T weight can be customized | ||||||||
| Coil L.D.(mm) | 508 | ||||||||||
| Max.Coil O.D.(mm) | 1500 | ||||||||||
| Max.Speed(m/min) | 16 | ||||||||||
| Feed Pitch Accuracy(mm) | ±0.15 | ||||||||||
| Feed ROLL | Upper1 / Lower1 | ||||||||||
| Straighten ROLL | Upper4 / Lower3 | ||||||||||
| Voltage | 380VAc / 60Hz | ||||||||||
| Air power supply | 5kg / CM² | ||||||||||
| Uncoiler Expansion | Hydraulic | ||||||||||
| Servo Motor(kw) | AC4.4KW with servo reducer | AC5.5KW with servo reducer | AC7.5KW with servo reducer | ||||||||
| Uncoiler Motor(kw) | 1.5 KW | 2.2 KW | 3 KW | ||||||||
| Coil Car | optional | standard | |||||||||
| Pass line | ±100 MM | ||||||||||
IV.Straightener adjustment
| Model/Width/Thickness | 0.8 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 |
| TNCF6-400 | 1 400 | 300 | 280 | 220 | |||||
| TNCF6-500 | 1 500 | 350 | 280 | 220 | |||||
| TNCF6-600 | 1 600 | 450 | 350 | 280 | 220 | ||||
| TNCF6-700 | 1 700 | 550 | 450 | 350 | 280 | 220 | |||
| TNCF6-800 | 1 800 | 550 | 450 | 350 | 280 | 220 | |||
| TNCF6-1000 | 1 1000 | 800 | 600 | 450 | 350 | 280 | 220 | ||
| TNCF6-1300 | 1 1300 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 | |
| TNCF6-1500 | 1 1500 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 | |
V. about vus
If make accurate quotation Need to provide for detailed requirements to me. Such as:
1,coil .I.D (mm)
2,coil .O.D (mm)
3,MAX coil weight (kg)
4,main material
5,max coil thickness (mm)
6,max coil width (mm)
7,voltage/ HZ
and so on :
You need a product
You May Like
- Nearest port for product export
- shenzhen
- Delivery clauses under the trade mode
- FOB, CIF
- Acceptable payment methods
- T/T, L/C
- Export mode
- Have the independent export and import right