I. Feeding feature by PLC program from MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC p...
I. Feeding feature by PLC program from MITSUBISHI
A automation equipment in high speed feeding coil for punch press. The machine is feeding levelling with uncoiling steel coil. The 3 in 1 whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi. This line can help to improve efficiency, lower cost and ensure quality. TNCF series has won wide market with its high performance and low price. The thickness of material can be from 0.2MM to 8MM, width from 150MM to 1600MM, highest precision ±0.15MM and speed 16M/min. This machine is applicable for processing of copper coil, aluminum coil, cold-rolled coil, hot rolled material, silicon steel, and stainless steel and so on.
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 16m/min
II. Straightening feature.
Features
1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6.Power hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw Jacks device
9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,
10.Coil side guide
11.Outgoing catenary to assist and support the material
12.A Clusster gear set maximizes transmission of horse power.
13.Transforme
Specification:
Item/Model | TNCF6-400 | TNCF6-500 | TNCF6-600 | TNCF6-700 | TNCF6-800 | TNCF6-1000 | TNCF6-1300 | TNCF6-1500 |
Width of Material(mm) | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 | 75-1300 | 75-1500 |
Thickness of Material(mm) | 0.8-8 |
Max.coil Weight(kg) | 3T(重量可定制) weight can be customized | 5T(重量可定制) weight can be customized | 8T(重量可定制) weight can be customized |
Coil L.D.(mm) | 508 |
Max.Coil O.D.(mm) | 1500 |
Max.Speed(m/min) | 16 |
Feed Pitch Accuracy(mm) | ±0.15 |
Feed ROLL | 上Upper1 / 下Lower1 |
Straighten ROLL | 上Upper4 / 下Lower3 |
Voltage | 380VAc / 60Hz |
Air power supply | 5kg / CM² |
Uncoiler Expansion | 油 压 Hydraulic |
Servo Motor(kw) | AC4.4KW(配伺服减速机) with servo reducer | AC5.5KW(配伺服减速机) with servo reducer | AC7.5KW(配伺服减速机) with servo reducer |
Uncoiler Motor(kw) | 1.5 KW | 2.2 KW | 3 KW |
Coil Car | 1 选 配 optional | 标配 standard |
Pass line | ±100 MM |
Stranghtening Thickness:
Model/Width/Thickness | 0.8 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 |
TNCF6-400 | 400 | 300 | 280 | 220 |
TNCF6-500 | 500 | 350 | 280 | 220 |
TNCF6-600 | 600 | 450 | 350 | 280 | 220 |
TNCF6-700 | 700 | 550 | 450 | 350 | 280 | 220 |
TNCF6-800 | 800 | 550 | 450 | 350 | 280 | 220 |
TNCF6-1000 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 |
TNCF6-1300 | 1300 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 |
TNCF6-1500 | 1500 | 1000 | 800 | 600 | 450 | 350 | 280 | 220 |