Slitting line machine not only for the steel service cutting industry, but also for the pipe industry.
I. Technical Data
High Speed Slitting Lines KJS180 Model |
Model | Sheet Thickness(mm) | Coil Width(mm) | No.Slitting | 公差(mm) | Line Speed (m/min) | Coil Weight(t) |
KJS180-1*650 | 0.2-1 | 150-650 | 30-8 | ±0.05 | 0-180 | 3、5 |
KJS180-1*850 | 0.2-1 | 300-850 | 30-8 | ±0.05 | 0-180 | 5、10 |
KJS180-1*1050 | 0.2-1 | 300-1050 | 30-8 | ±0.05 | 0-180 | 5、10 |
KJS180-1*1300 | 0.2-1 | 400-1300 | 30-8 | ±0.05 | 0-180 | 10、15 |
KJS180-2*650 | 0.3-2 | 150-650 | 30-8 | ±0.05 | 0-180 | 3、5 |
KJS180-2*850 | 0.3-2 | 300-850 | 30-8 | ±0.05 | 0-180 | 5、10 |
KJS180-2*1050 | 0.3-2 | 300-1050 | 30-8 | ±0.05 | 0-180 | 5、10 |
KJS180-2*1300 | 0.3-2 | 400-1300 | 30-8 | ±0.05 | 0-180 | 10、15 |
KJS180-2*1600 | 0.3-2 | 400-1600 | 30-8 | ±0.05 | 0-180 | 15、20 |
KJS180-2*2000 | 0.3-2 | 500-2000 | 30-8 | ±0.05 | 0-180 | 15、20 |
KJS180-3*1300 | 0.4-3 | 400-1300 | 30-6 | ±0.05 | 0-180 | 10、15 |
KJS180-3*1600 | 0.4-3 | 400-1600 | 30-6 | ±0.05 | 0-180 | 15、20 |
KJS180 series NC precision slitting production line is for material 3mm thick,max.1600mm width of coil, with speed 180m/min,cutting strips 30 pieces . This line is the best choice for coil procssing center user .The machine consists of coil car ,uncoiler ,straightener ,loop Ⅰ,slitting machine,scrap winder, loop Ⅱ,belt bridlle ,recoiler ,asisting support ,exit coil car ,hydraulic system ,electrical system and so on.
The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. The information of order amount, cutting strips and speed can be input to the PLC systems. KJS180 series use belt briddle ,it is higher cost performance for customer with precision surface requirement ..
III. Machine parts in the working line
1. coil car
2. decoiler
3. peeler entry table
4. Straightener.
5. Shearing machine
6. loop table
7. coil guide and pinch roll
8. Slitting machine
9. scrap winder (both sides)
10. Loop table
11. separator and tension table
12. Deflector roll and exit threading table
13. Recoiler
14. Over arm separator in the recoiler.
15. Exit coil car for recoiler
16. Hydraulic system
17. pneumatic system
18. electrical control system
About us
Kingjime machine Limited is a TaiWan of Chinese technological enterprise manufacturer with Japanese technology to make steel coil cut to length line ,slitting line ,High Frequency pipe mill machine,feeder machine .We owned National high and new technology enterprise with 40 patents and intellectual property rights over the last for years.welcome to kingjimemachine as they!
we have established steady cooperation with customers in over 58 countries.