group nameArmature production line
Min Order1 piece
brand nameNIDE
modelND-ZZX-6
payment methodL/C, T/T
update timeTue, 25 Oct 2016 14:16:29 GMT
Certification CCC
Name armature production line
Function produce armatures
Condition New
Automation High automation
Min Order1 piece
This automation rotor manufacturing assembly line is consisted of serval machines, including insulation paper insertier, rotor winder, commutator welding machine, wedge inserter, and rotor testing machine. This production line is equipped with mechanical arm which will carry the rotor and transfer it to the next station.
Applications:
It is suitable for power tooling motor armature production, especially with agreat production valume.
Insluation paper inserting machine
This machine is used to inserting paper into rotor slot. The insulationmaterial can be as per customer's requirement, DMD,DM, polyester film are all can be used in this machine.
Rotor winding machine
After doing paper inserting machine, mechanical arm and converyorwill carry the rotor the rotor winding machine position. The machineis equipped with touch screen and PLC, winding parameter could be set andmodified on the screen.
Commutator welding machine
It can weld both riser and hook type commutators. This machine is applied to DCmotor and universal motor. It is controlled by PCL, all the data setting can bedone on the touch sreeen. There are four power control method, namely secondaryconstant current, secondary constant voltage secondary constantfrequency.
Wedge inserting machine
The wedge material can be as per customer's requirement, DMD,DM, polyester film are all can be used in this machine.
Rotor testing machine
It is suitable for testing less than 72 segments armature. The Voltagewithstand test time could be set as per different requirements. Testingitems could be screened.Testing data saved automatically, and could be tracedand printed at any time
Information needed for rotor production line inquiry
It will be better if customer could send us detailed drawing including belowinformation.
1. Rotor lamination drawing
2. Rotor assemble drawing
3. Rotor stack drawing
4. Rotor winding diagram drawing: with rotor wire diameter and turn number
5. Commutator drawing
6. Shaft drawing
7. Required residual unbalancing volume and initial unbalancing volume
8. Wedge and insulation paper material
9. Required productivity
10. Other technical requirement
If possible, it will be better if customer can send us samples.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.