200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY630 HY638
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:50:16 GMT
Color Varies
Curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation molding silicone rubber
HS code 39100000
Port shenzhen
Sample Available
Min Order200 kilogram
Appilication of RTV liquid silicone rubber for Polyester Resin casting :
RTV liquid silicone rubber for Polyester Resin casting is primarily intended for the mold making of poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Description of RTV liquid silicone rubber for Polyester Resin casting :
Liquid RTV Silicone Rubber Molding is white or red flowing liquid with general hardness of 22-50A°after curing. Hongye Condensation silicon is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Standand Datasheet of RTV liquid silicone rubber for Polyester Resin casting :
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
638# | white | 100 : 3 | 30 | 5-10 | 38 | ≥ 38 | ≥ 28 | 34000-36000 | ≤0.3% | 380% |
630# | white | 100 : 3 | 30 | 5-10 | 30 | ≥ 47 | ≥ 35 | 28000 | ≤0.3% | 430% |
Operation of RTV liquid silicone rubber for Polyester Resin casting :
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
Frequently Asked Questions of RTV liquid silicone rubber for Polyester Resin casting:
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
Certification of RTV liquid silicone rubber for Polyester Resin casting :
Package of RTV liquid silicone rubber for Polyester Resin casting :
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.