Liquid RTV Silicon for Template

Features of Liquid RTV Silicon for template  
(1) Liquid RTV Silicon for template with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available
 
 

Operation of Liquid RTV Silicon for template 
1. deal with original moulds
2. brush on release agent
3. correct weigh accoring to mixng ratio
4. stir the two component evenly
5. vacuum-pumping
6. pouring
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
 
 
FAQ of Liquid RTV Silicon for template  
Why should the silicone template be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicone rubber.
b. Using the silicone rubber with a high hardness to make templates for small sized products with delicate and intricate designs .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages. 

PACKAGE: Packed in clean 25kg/pail,  200kg/pail.

Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561