Addition cure silicon rubber for chocolate mold
- US $15.00
200 - 40,000 kilogram
- US $11.00
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-642
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:34:20 GMT
Paramtents
color semi transparent
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
| Addition cure silicon rubber for chocolate mold |
| Description Addition cure silicon rubber for chocolate mold : |
E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
E-642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
| Applications of Addition cure silicon rubber for chocolate mold : |
E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
FEATURES of Addition cure silicon rubber for chocolate mold : |
1. Two-parts, flowable liquid silicon & curing agent.
2. Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
4. It gets cured at room temperature 25 0C within 5-7 hours.
5. An exceptional fluidity and good operability, easy to be demolded.
6. Suitable for pouring methods of operation for small sized molds making.
Model | E-642# |
Appearance | Semi Transparent |
Mixing Ratio | 1:1 |
Viscosity part A (Mpa.s) | 20000±2000 |
Viscosity part B (Mpa.s) | 3500±1000 |
Viscosity mixed(Mpa.s) | 8200 ±2000 |
Operating time ( Mins 25C) | 20-40mins |
Curing time ( Hrs 25C) | 2~3hrs |
Hardness (A°) | 42±2 |
Tensile-strength(kgf /cm2 ) | 60±5 |
Tear-strength (Kgf/cm ) | 11±3 |
Elongation-break(%) | 300±20 |
Retractility(%) | ≤0.1 |
Packing (kg/pail ) | 20kg/drum,200/drum |
| OPERRATING INSTRUCTION of Addition cure silicon rubber for chocolate mold : |
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
| SHELF LIFE |
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
| PACKAGE |
Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail
| Any questions, please feel free to contact Jojo (sales manager): Phone:0086-755-89212365 FAX: 0086-755-89948030 MOBILE:0086-13410023134 E-mail: hyjt(at)szrl(dot)net MSN: jojohmj (at) hotmail (dot) com Website: http://..........net |
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents