200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-9315silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:19:41 GMT
color: transparent
Certifications: RoHS.SGS ISO9001:2000
brand hong ye silicone rubber
application potting electronics
MOQ 200 kgs
HS CODE 3910 0000
shelf life 1 year
sample available
mixing ratio 1:1
Min Order200 kilogram
Electronic Specialty Adhesive silicone Sealant
Product Feature
RTV-2 Silicone sealant is a newly insulating material silicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Features
1,Room temperature vulcanize, and easy to operate;
2,Maintain flexibility at a wide temperature range, and excellent insulation performance;
3,Waterproofing, moisture-proof, mouldproof, dustproof, and fixed components;
4,Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
9301 Silicone Sealant for PCB substrate
Typical Application
9301 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters
Features | Part A | Part B | |
Before Curing | Appearence | Transparent Fluid | transparent Fluid |
Viscosisty(25°Ccps) | 600±200 | 800±200 | |
Operation features | Mixing Ratio | 1to1 | |
Viscosisty(after mixing) (cps) | 600~1000 | ||
Operating Time(25°C hr) | 3 | ||
Curing time (min,25°C) | 8 | ||
Curing time(80°C hr) | 20 | ||
After Curing | Hardness(Shore A) | 15 | |
Thermal conductivity [W(m·K)] | ≥0.2 | ||
Dielectric Strength(KV/mm) | ≥25 | ||
Permittivity(1.2MHz) | 3.0~3.3 | ||
Volume Resisivity(Ω·cm) | ≥1.0×1016 | ||
linear expansibility [m/(m·K)] | ≤2.2×10-4 | ||
Fire Resistance | 94-V1 |
(Pls notethe above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
9301 Silicone Sealant for PCB substrate
TECHNICAL GUIDELINES
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio part A to part B = 1 to 1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Any more information , please fell free to contact with Mr. Allen
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Mobile:0086-18682484160
9315 Silicone Sealant for PCB substrate
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.